The quality of Huaihua desulfurization gypsum briquetting machine equipment is absolutely satisfactory h2 Huayi Machinery

Overview of desulfurization gypsum briquetting machine
Desulfurization gypsum briquetting machine is mainly used to press desulfurization gypsum powder and press it into pellets to be used as cement raw materials. In recent years, it has been widely used. It is characterized by high molding pressure, easy demoulding, high output and low energy consumption.
The service life of the desulfurization gypsum briquetting machine is greatly reduced because it is not maintained in time. Therefore, the maintenance of the desulfurization gypsum briquetting machine is undoubtedly very important. If the maintenance is not good, the service life will be reduced, and it may even be damaged. affect factory production. Although the topic of maintaining the desulfurization gypsum briquetting machine is a cliché, if you want to appropriately extend its service life, you need to increase the maintenance workload, especially the maintenance of the internal parts of the desulfurization gypsum briquetting machine. The following introduces the maintenance measures for three desulfurization gypsum briquetting machines during use.
During the operation of the desulfurization gypsum briquetting machine, we often find that sometimes there is oil leakage in the hydraulic system. At this time, the operation should be stopped immediately. This is the same as a car engine oil failure. You need to wait until the repair is completed. Can work again.
It is common for dust to fall into the interior of the desulfurization gypsum briquetting machine during operation. What we need to do is to clean the internal dust on time. Once too much dust accumulates in the internal parts, it will affect the operation of the entire machine. .
If the internal parts of the keyway desulfurization gypsum ball press are found to be worn, the bearing grease should be replaced immediately and cleaned. Pay attention to the oil pressure of the oil cylinder. If there is a large pressure change in the oil pressure, you should Immediately inject new oil, open the inspection cover of the reducer, check the meshing and wear status of the keyway gear, check whether the foundation and safety bolts are loose, and tighten them.
Henan Huayi Machinery Co., Ltd., a briquetting machine manufacturer, specializes in the development and production of various briquetting machines such as dry powder briquetting machines, desulfurization gypsum briquetting machines, mineral powder briquetting machines, and coal briquetting machines. equipment. Hourly service hotline
Henan Huayi Machinery Manufacturing Co., Ltd.
Telephone
Mobile phone
Fax

Email@
Address Wen County, Jiaozuo City, Henan Province Industrial cluster