Product Details
br/> Using the new plug-in pipe connector, patent number br/> Simple installation changes the pipe connector from the traditional threaded type to the plug-in type. You can directly position the eyewash and shower according to the location required. It not only greatly shortens the installation time, but also effectively avoids the problem of water leakage that may be caused by traditional sealing materials. It also avoids the inclination of the pipe fittings produced after tightening the pipes in traditional installation, which affects the use effect. The up-to-standard material is made of up-to-standard stainless steel, with a content higher than %, and its corrosion resistance is much stronger than that of sub-standard stainless steel. On the basis of compliance
The pipe diameter has been changed from the original to further improve the practicality of the eyewash.br/> Exquisite All pipe fittings and valves in the process are precision cast by our company, which has higher precision and can be easily disassembled, replaced and repaired. It effectively makes up for the shortcomings of traditional products such as non-detachable, low strength and poor durability. Safe use adopts cold rolling process, using sanitary stainless steel material, the inner wall of the tube is smooth mirror surface, no grease, no rust, and the sealing tape is changed to a typebr/> sealing ring, making it safer for you to use.
Technical indicators: The main link parts are stainless steel, and the main body is made of galvanized steel pipes. br/> The coating is high-brightness epoxy resin paint coating, which effectively resists the corrosion of chemical substances and ultraviolet rays. br/> High-density shower The material is used for flushing the whole body. The shower switch ball valve can be quickly activated in seconds. Under standard water pressure, the flow rate of the shower head can reach .L/min within minutes.
Water flow range of the shower device Under standard water pressure, the water flowing out of the shower device spreads out within a range of ¢br/> at the horizontal plane from the fixed base. The eye wash station is used to clean the eyes, face, hands and other parts. The basin is made of high-density material and has an appropriate height. The design of the double water holes is in line with ergonomic principles. The height and angle of the holes are completely designed according to the proportion of the face. The eyewash switch ball valve can be quickly activated within seconds. Under standard water pressure, within minutes, the flow rate of the eyewash nozzle reaches .L/min. The eyewash nozzle is reinforced with nylon and can filter water impurities. The principle of pressure relieving is used to make the sprayed water gentler. During use, excessive water flow will not damage the eye membrane and nerves inside the eyes, causing secondary damage
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Eye wash station Beijing A511390】are provided by member【Shanghai Jiebo Electronic Technology Co., Ltd.
】,By Titker Trade Network members 【Shanghai Jiebo Electronic Technology Co., Ltd.
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!