The best rubber mill in Dali has a constant supply of h10 Heying Machinery

With the development of automobiles, more and more tires are being scrapped. These waste tires are recycled and reused. The waste tires are produced into rubber particles and rubber powder through a rubber grinding machine, which can be supplied to recycled rubber factories and waterproof rolls. Material factories, some rubber product factories, another part of highways, rubber floor tiles, and school playground tracks. For the health of the next generation of students, the country is now vigorously promoting the change of school playgrounds into dust-free playgrounds, which are laid on the playground to prevent students from running. Generate dust and noise, giving students a healthy and environmentally friendly place
Rubber mill production technology and process
First cut off the rubber ring of the tire with a knife, and then use a rubber tapping machine (or manual knife cutting) to The tires are cut into blocks, then fed into the crusher, crushed into particles of about millimeters, sent to the rubber mill by the conveyor, and dropped into the vibrating screen through the grinding. After screening, some semi-finished products continue to be recycled and processed to obtain Finished rubber powder. This project is simple and easy to learn, and there are no special techniques or recipes that you can understand at a glance.
How to install and use the rubber millbr/> The rubber mill consists of three parts: the main frame, the motor, and the motor frame.
First connect the main machine and the motor frame, then install the motor on the motor frame and install the triangular transmission belt. At the same time, check the tightness of the triangular transmission belt. The motor shaft and the grinding mill shaft should be kept parallel.
Before starting, turn the V-belt first, check whether there is any obstruction on the spindle, and loosen the adjustment handwheel clockwise.
Fill the feed hopper with the desired rubber particles, start the mill, and be sure to run it according to the arrow in the running direction shown.
After starting up, the rubber particles will flow out from the discharge port after being ground by the stator and rotor of the mill. At the same time, tighten and lock the adjusting handwheel in the counterclockwise direction.
The rubber particles are ground into the required rubber powder through the stator and rotor of the grinding mill.
The rubber particles should be kept uniform in size, and check whether there are any hard materials such as stones and metal entering the grinding mill.
This machine should fill all bearings with butter within ten working days to avoid bearing wear due to lack of oil.
Gongyi Heying Machinery Manufacturing Co., Ltd.
Manager Zhou
Landline
Toll-free number
Enterprise
Factory address No. Jianshe Road, Gongyi City, Zhengzhou, Henan Province (since When driving, you can navigate to Heying Company)