How much does it cost to supply RXWO-35/0.5A, RXWO-35 high voltage fuse?

Yueqing Dengrui Electric Co., Ltd. supplies outdoor high-voltage current-limiting fuses. How much does an outdoor high-voltage current-limiting fuse cost? If you are looking for an outdoor high-voltage current-limiting fuse manufacturer, choose Dengrui Electric. Please call us for details! The following is a detailed introduction to outdoor high-voltage current-limiting fuses
Outdoor high-voltage current-limiting fuses are the simplest and earliest used protective appliances. High-voltage fuses are the simplest and earliest used protective appliances. Used to protect electrical equipment in circuits from overload and short-circuit currents. High-voltage current-limiting fuses cannot be used to normally cut off and connect current hazards. They must be used in conjunction with other electrical equipment (isolating switches, contactors, load switches, etc.). Switches etc.) are widely used in devices with voltages of ~ and below. In devices with voltages of ~ and below, outdoor high-voltage current-limiting fuses are widely used in devices with voltages of ~ and below. In devices with voltages of . In high-voltage equipment, it is mainly used to protect small-power power lines, electric transformers, power capacitor transformers, power capacitors, voltage transformers and other equipment.
It is required that the material of the high-voltage fuse melt should have a low melting point, good electrical conductivity, not easily oxidized and easy to process. Generally, there are lead, lead-tin alloy, silver and other metal materials. Generally, there are lead, lead-tin alloy, zinc, copper, silver and other metal materials. Tin alloy and zinc have low melting points, respectively ℃, ℃, ℃. Lead, lead-tin alloy and zinc have low melting points, respectively ℃ ℃ ℃ but they are conductive. The performance is poor. The cross-sectional area of the melt made of these materials is quite large but the conductivity is poor. The cross-sectional area of the melt made of these materials is quite large. When the high-voltage fuse is blown, too much metal vapor is generated, which is detrimental to arc extinguishing. Therefore, in devices with a voltage of above, it is not suitable to have too much metal vapor in the above devices, which is detrimental to arc extinguishing. Therefore, melts made of these materials are used in devices with voltages above br/> High voltage fuse models
,/,/,/,/,,/,/,/,/,/,/,/, /,/,/,,/,/,/,/,,/,/,/,/,/,/,/,/,/,/,,/,/,/,/,,/,/, /,/,/,/,/,/,/,/Indoor high-voltage current-limiting fuse
This information is supplied, outdoor high-voltage current-limiting fuse how much does the outdoor high-voltage current-limiting fuse cost, provided by Dengrui Electric, Product descriptions are subject to change without notice. For details, please log on to the official website of Yueqing Dengrui Electric Co., Ltd. or call for consultation