Year1
- 型号：
- PVC1400S/1200
- 单面胶：
- ≥0.8mm
- 单面厚：
- 1.5mm-4.5mm
/Flame-retardant conveyor belt
The whole-core flame-retardant conveyor belt is mainly suitable for underground transportation in coal mines, and can also be used for material transportation in the metallurgical and chemical industries.
Whole-core flame-retardant conveyor belts, belts, rubber belts, conveyor belts, flame-retardant conveyor belts for coal mines
Uses are suitable for transporting coal in flammable situations in coal mines, and can also be used where flame-retardant tools are required to conduct static electricity. Electric power, chemical industry, metallurgy and other industries.
Features
.Excellent flame retardancy, good electrical conductivity
, light belt body, high strength
, good overall performance
, whole core flame retardant conveying The belt has the characteristics of good anti-skid performance and large climbing angle.
, The belt body is light and the power consumption is low. This advantage is very important for longer transmission systems. It thus allows the use of smaller power drives and can save energy in the long term.
The flame-retardant conveyor belt has good flexibility and thin belt body, so the conveyor can choose a smaller diameter roller.
The flame-retardant conveyor belt has high weft strength and high longitudinal tear resistance.
The structural core flame-retardant conveyor belt is made of nylon (or polyester) filament and cotton fiber woven into a whole core. It is impregnated with paste and plasticized to form a fully plastic whole-core conveyor belt. It is used in dry conditions below the inclination angle. material transportation. The whole-core flame-retardant conveyor belt is a rubber-covered conveyor belt that is vulcanized and formed into a rubber-faced whole-core conveyor belt based on the whole-core flame-retardant belt. It is used for conveying wet and watery materials below the inclination angle.
Product Category
. Ordinary integral belt core is made by soaking the surface protective layer.
Based on the ordinary type, the upper and lower parts of the belt are covered with rubber as the main material and are molded.
Structural features and uses
The whole-core flame-retardant conveyor belt has excellent flame-retardant and electrostatic conductive properties, fully meets all requirements, and is especially suitable for material transportation in flammable situations in coal mines. .The belt body is made of high-strength, low-elongation high-quality polyester filament in the longitudinal direction, and high-strength and moderately molded nylon filament in the transverse direction. It has high strength, small elongation, light belt body, no delamination, impact resistance, and It has the advantages of good tear resistance and good groove forming properties of the belt.
. The ordinary type is suitable for drying conditions where the conveying inclination is not greater than 10 degrees. The type can be used to transport wet situations below the inclination angle.
Because the .type is covered with a cover glue made of rubber as the main material, on the basis of the type, it further improves the groove-forming properties of the tape, the surface's wet slip resistance, low temperature resistance, and the tensile strength of the covering glue. performance and wear resistance, etc. Therefore, not only can the conveying angle be increased, but the service life of the tape can also be greatly extended.
The conveyor belt for coal mines has passed the mining product quality certification and has its unique characteristics, as follows
The whole core flame-retardant conveyor belt for coal mines has flame retardant, anti-static, high tensile strength, long life, and elongation during use It is small, has good groove-forming properties, and has good flexibility resistance. It is suitable for long-distance, large-span, large-volume and high-speed material transportation.
Mining conveyor belts are suitable for underground transportation in coal mines, and can also be used for material transportation in metallurgy and chemical industries, etc.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
WhatsApp
