Hebei Kangbaiyu PC solar panel factory supplies anti-drip solar panels for greenhouses

型号：

KBY-PC002

规格：

2100*6000

材质：

聚碳酸酯

Hebei Kangbaiyu Sunshine Panel Factory supplies anti-drip sun panels for greenhouses [supply/polycarbonate sun panels, endurance panels, lock panels, clean panels, particle boards, ten-year warranty, and favorable prices. Supply telephone number, national toll-free hotline
]
Methods of fixing Kangbaiyu solar panels to steel frame structures
Kangbaiyu Factory has introduced the matters that need to be paid attention to before installing solar panels and endurance panels. The following will be A more detailed introduction to the installation preparations and steps of Kangbaiyu solar panels
It is necessary to check whether the expansion reserve of Kangbaiyu solar panels is reasonable, whether the cutting size of the panels is qualified, and whether the reserved expansion gaps are uniform. enough. For relevant data on the expansion gap, you can ask the manufacturer for help.
Second, when installing and fixing the Kangbaiyu solar panel and accessories, it is best to tear the protective film to avoid the accessory strips from pressing down the protective film. However, be careful not to expose too much, otherwise it will easily scratch the solar panels during the installation operation.
Third, if the Kangbaiyu solar panels are coated, you must pay attention to distinguish them during installation. Install the anti-UV side facing outwards, and install the side without anti-UV coating facing inward. Do not install them incorrectly.
Fourth, if it is a Conbaiyu hollow solar panel installation project, at least a minimum of space must be maintained at the edge of the panel connection, and the connecting clamping accessories of the Conbaiyu solar panel installation project must have at least one less rib, and the accessories must be installed. , when compacting the sealing strips and plates, the connectors need to be tightened evenly with self-contained nails without using too much force. If leakage occurs due to installation errors, sealants must be used in time to deal with it.
6. If you need to drill and drill the board yourself, you must take into account the thermal expansion and contraction properties and principles of the board and leave a reasonable gap.
7. If the Kangbaiyu solar panels are to be cold-bent, be sure to note that the cold-bending direction can only be along the ribs. Similarly, in order to facilitate the flow of condensate, the tilting device of the Kangbaiyu solar panels also needs to be bent along the ribs. In the direction of the ribs, it should also be noted that the bending radius of the Kangbaiyu solar panel cannot be less than times the thickness of the solar panel.
8. Check whether there is any leakage after the panels are installed, and check all aspects that need attention, including appearance, quality, etc.
9. During the installation process, you cannot step on the solar panels with your feet for convenience. You must use more professional tools to move them across.
Ten. After confirming the installation of Conbaiyu solar panel devices and accessories, you can tear off the protective film. If it is necessary to protect the Kangbaiyu solar panels during construction, they should be torn off first and then covered with a protective film.
Unit name Kangbaiyu Plastic Technology (Beijing) Co., Ltd.
Factory address West of Baimiao Building Materials Market, Tongzhou District, Beijing/
Marketing Manager Han Han mobile phone,
,,
Company telephone and fax
VIP hotline