LB-300 electric bolt wrench has the first reputation

Model electric bolt wrench has the best reputation
Zhou Shuangxing? Twenty years of professional manufacturing
Responsor Ms. Zhang
Address Songpo Road, Linghe District, Jinzhou City, Liaoning Province
Public address > Real user consultationbr/>Creating a leading brand in the industry? Jinzhou Shuangxing Electric Bolt Wrench The efficiency is even more improved, so how many types of internal combustion wrenches are there? There are electric handheld, internal combustion handheld, horizontal diesel single head, gasoline single head, electric single head, gasoline double head wrench, high-speed rail hydraulic wrench, etc. They are all tailor-made for railway lines. The wrenches produced by our factory have received unanimous praise from the workers and masters in use. The following is the specific model
Electric bolt wrench
Spindle speed/
Maximum output Torque?
Working efficiency units/minute
Motor
No.
Constant power
Constant speed/
Applicable scope Looseness and tightening of nuts
The working principle of the machine mass is driven by an electric motor, so that the output torque passes through the conical friction clutch (universal coupling drive shaft) to transmit the motion and power to the bevel gear mechanism (deceleration and direction change), and then passes through the booster ( Variable force loading and impact) until the sleeve rotates, the nut can be loosened and tightened (work) in an impact style.
Structure
Motor, machine base, reversing handle, handle, sleeve, power switch, booster, fork type electric bolt wrench railway
Used for railway lines Loosening and tightening of sleeper bolts and nuts. The machine has large impact force and centralized operation, which can meet the locking torque of rail fasteners and is convenient and fast. A rotating four-wheel walking device is installed on the base, which can walk on land or on rails. It is easy to transport and is an ideal special tool for loosening and tightening sleeper nuts instead of heavy manual labor.
It is strictly forbidden to pull the reversing handle of this machine while the motor is working. If the machine is damaged due to this, you will be responsible for the consequences.
After the machine works for one cycle, the reversing handle can be pulled to reverse direction to evenly wear the gears.
When the machine is suspended from use or repaired or replaced, the power supply should be cut off first.
It is strictly prohibited to use it in rainy days or when the motor is damp to prevent danger. If the motor gets wet, dry it before use.
If it is not used for a long time, it should be placed in a ventilated, dry, and corrosive-gas-free warehouse.
Type electric bolt wrench
Check whether the transmission part is flexible, whether the threaded connection is loose, and check whether the contact between the motor and the power cord is good.
Turn the power switch forward or backward to any position to turn on the motor. After the no-load operation is normal, it can start working (the forward direction or pulling direction of the motor means tightening or loosening the working sleeve).
When the motor is stopped, turn the reversing handle to the loose or tight position, turn the motor switch to the reverse or forward direction, observe whether the rotation direction of the sleeve meets the operation needs (loose or tight), and set the determined direction Remember to turn off the motor switch.
After the rotation direction of the sleeve meets the requirements, hold the operating handle to align the sleeve and tighten the nut. Turn the motor switch to the loose or tight state to loosen or tighten the nut by impact.
When tightening, if you hear a clicking sound, you can lift the sleeve. At this time, the torque is about 100. If the torque is not enough, just hit it a few more times.
When pulling the reversing handle, be sure to turn off the power switch.
The eccentric sleeves of the transmission shaft, universal coupling gear mechanism, and reversing handle should be inspected and filled with molybdenum disulfide grease once a week to keep them clean. They should be inspected once every two months. After cleaning with kerosene, add them with grease. Molybdenum disulfide grease.
The booster is inspected once a month. After cleaning it with kerosene, add gear oil to keep it clean.
The rolling bearings of the running wheels should be inspected once every two months of operation. After cleaning with diesel, add molybdenum disulfide grease to keep them clean and ensure smooth operation.
Type electric bolt wrench
There are many types of railway machinery. In order to allow consumers to buy with confidence, we have launched a series of convenient services for all railway machinery produced by our factory, including cash on delivery and online payment. , corporate account payment and other forms. As the saying goes, real gold is not afraid of fire, and good goods are not afraid of inspection. Areas close to our factory can deliver door-to-door, install and debug. This is truly true, so that you can experience our products at your workplace. Products,