rack starter

规格：

齐全

Rack starter
Rack starter, ton starter, ton starter, price of rack starter, wholesale and retail of rack starter
Let’s teach you about the rack starter Instructions for use and precautions
Instructions for use: Lifting operation: Place the machine upright so that the rack knuckle part is placed under the rail or heavy object, insert the crowbar into the rocker hole, and swing the crowbar up and down with force. The rail row or heavy objects can be raised to the required height tooth by tooth. During the quick lowering (unloading) operation, lift the crowbar upwards and swing the rocker upward at a certain angle. The top surface of the starter tooth plate will be separated from the rack tooth surface. Pull the starter tooth plate back so that its teeth are inserted into the tail of the brake tooth plate. In the triangular groove, press the crowbar again to achieve quick lowering (unloading). Slow lowering operation: When it is necessary to lower the height of one or two teeth after lifting, the operation is to drive the crowbar to swing down and press down, so that the brake tooth plate is separated from the rack without load, and the brake tooth plate is pulled back. Slowly loosen the crowbar so that one tooth of the rack is lowered. Then relax the brake tooth plate so that its tooth enters the upper tooth of the rack. Release the crowbar so that the brake tooth plate is stressed. At this time, the starting tooth plate is not stressed, and then Gently lift the crowbar and pull open the starter tooth plate so that the tip of the tooth reaches the upper tooth of the rack. In this way, the operation of lowering the lifting object by one tooth height is completed. By analogy, we can achieve slow tooth-by-tooth reduction.
Precautions for use. Before starting the road operation, you should check whether there is any malfunction or damage, and whether the no-load operation is flexible.
It is recommended that the crowbar be made of steel pipes. Its dimensions are outer diameter ~ and wall thickness ~ , the length is slightly tapered at one end. . When lowering slowly, the operator should stand on one side of the crowbar and do not stretch his hand too close when pulling the tooth plate to prevent scratches. 2. When encountering an emergency during the road starting operation, the machine should be quickly lowered and the machine should be evacuated.
Taian Dingxin’s rack starter production attaches great importance to quality control and management. Our track starter production is completely controlled in accordance with the
quality system, and we have also obtained a railway product production license from the Ministry of Railways of China. We have a full set of testing equipment to ensure the quality of all our starter products and meet customer requirements.
Procurement contact Liu Zhenzhen
Mobile phone
Telephone
Fax
E-mail
@
National toll-free hotline
Address Lingshan, Tai'an City, Shandong Province Street number