IBM Tape Library Troubleshooting FAQ

)DaQiaoKou
'
Common problems with tape drives, tape drive yellow warning lights are on, tape drives automatically eject tapes, tape drive jump errors, tape drive drivers are missing or incorrect, and backup processes are frozen due to , the tape drive cannot read the tape and cannot back up, / insufficient space causes the tape drive to be unable to back up the file, the version is older, resulting in incomplete tape information for backup, the backup command is lost due to environment variables, causing the tape drive backup time without this command, Unable to back up. Checking steps for tape drive common problems. When an alarm occurs or when backup cannot be performed, first check whether the cable and terminator are faulty, whether the tape drive alarm light is on, whether the tape is or whether the tape is compatible with the tape drive, and whether the tape drive box indicator light is on. Normal, please refer to the manual and check the small button next to the connecting cable on the back of the tape drive. It says No or Yes. If necessary, adjust it. Log in to the system, check whether & is in status and check whether it is a tape drive model. If not, it is plug-in. You need to check whether it is a tape drive connected by optical fiber. If so, the optical tape drive cannot be used for backup. , check to see if there is one, and if so, whether the version is an older version, you need to go to the official website to compare and check, check the card connected to the tape drive cable or the peripheral card with the interface, whether the path on the card is abnormal and There are also event logs to determine if there is a problem with the card that prevents the tape from being powered on to the host