MB75 continuously variable transmission has a power of 5.5KW and a speed adjustment range of 1000-200

Shanghai Nuoguang produces continuously variable transmissions with power, basic speed adjustment range (both vertical and horizontal types can be installed). In recent years, the series of transmissions have been used in practice and have proven to have unique styles among its many transmissions. They are widely used in food, printing, papermaking, rubber, plastics, ceramics and various work production lines with many required process parameters. When the speed and speed change continuously. The series continuously variable transmission is composed of a set of tapered planetary friction wheels and speed regulating cams. Different friction radii are generated between the driving wheel and the pressure wheel, ultimately achieving stable stepless speed change. All transmission parts of the speed regulator have been strictly processed, precision processed and ground to ensure long service life and low noise of the speed regulator. The speed regulator can be reasonably combined with gear reducers, cycloidal pinwheel reducers, worm gear reducers, worm screw lifts, etc. to meet the different requirements for output torque, minimum and maximum output speeds, and lifting speeds in different situations. .
Continuously variable transmission model
Basic horizontal type, vertical type
One-stage gear
This series of reducers are equipped with a series of ordinary three-phase asynchronous motors as standard, and the motor adopts pure Copper motors, if you need frequency conversion, braking, explosion-proof, variable frequency braking, etc. motors, please contact us or make a note yourself.
Transmission range
Basic type/
Transmission with one-stage gear reduction/
Transmission with two-stage gear reduction/
Technical parameters
Input power. ~
Speed regulating range~/
Allowable torque
When the continuously variable transmission leaves the factory, the traction oil is fully added, and there is no need to add more. The machine must not be started without oil
The operating environment temperature of the continuously variable transmission and worm gear reducer is ℃~+℃, the internal temperature rise of the machine shall not exceed ℃, and the maximum temperature shall not exceed ℃.
Please note that the speed of the continuously variable transmission must be adjusted when the machine is turned on. The handwheel should not be turned too fast when adjusting the speed. It is strictly forbidden to turn the speed control handwheel when it is stopped. The speed control limit screw under the handwheel has been adjusted at the factory and must not be adjusted arbitrarily to avoid damaging the transmission parts.
, continuously variable transmissions and worm gear reducers can be used in both forward and reverse directions, but they must not exceed the rated torque.
If the motor is replaced, attention should be paid to retaining the original motor flange with oil seal to prevent lubricating oil from flowing into the motor.
The lubricating oil replacement cycle for continuously variable transmissions and worm gear reducers (except for maintenance-free) is after the first use. The lubricating oil should be completely replaced once. If the working condition is poor, the lubricating oil replacement cycle should be appropriately shortened. If the If there is a gear reduction part, the reduction grease must be replaced accordingly during use of the gear box.
, continuously variable transmissions and worm gear reducers are only suitable for power transmission and cannot be self-locking.