Year1
- 产品规格：
- 齐全
Steel can be used to manufacture cold work die steels with large cross-sections, complex shapes, large impact forces, and high wear resistance requirements, such as silicon steel sheet punching dies, cold cutting scissors, edge trimming dies, etc.
Chemical Composition
Carbon
Silicon
Manganese
Chromium
Tungsten
Vanadium
Phosphorus
Sulfur
Molybdenum
Characteristics
High wear resistance, can be vacuum heat treated to 100%, and has excellent processing performance.
Heat treatment process
Heat treatment method
After rough machining of the stress-relieved annealed workpiece, it is heated to ~℃, kept warm, cooled to ℃ with the furnace, and air-cooled out of the furnace.
The quenched workpiece is slowly heated to ℃, and the temperature is maintained for the first time to preheat. After equalizing, the temperature rises to ℃, and then the temperature is maintained for the second preheating. Finally, the temperature is raised to ℃, kept warm, and air-cooled after leaving the furnace.
Tempering should be tempered immediately after quenching, and tempered at least twice, and the holding time each time should not be less than
Heat treatment precautions
Tempering should be done in time after quenching to prevent cracking, and to To prevent surface decarburization, gauges and high-precision molds should be cryogenically treated (°C), and high-temperature tempering should be used to reduce workpiece deformation. High-temperature tempering temperature ~°C, hardness, large annealing indentation diameter. Quenching,
Before leaving the factory Condition
Hardness and thickness
Annealed to
Thickness
Usage
Used for metal stamping dies, drawing dies, stainless steel sheet punching dies, high hardness punching dies, Shearing dies, thread rolling dies, hardware parts manufacturing, machinery manufacturing, etc.
WhatsApp
