Year1
- 材质：
- pvc，夜光材料
- 工艺：
- 丝网印刷
- 发光时间：
- 超过12小时
The luminous film made of plastic has certain flame retardancy
Has certain resistance to salt water and detergent (the surface can be cleaned with detergent)
Has good heat resistance , cold-resistant performance, suitable for environments with temperatures of degrees Celsius
Has good physical and mechanical properties, can be cut and bent at will
Comes with self-adhesive, which can be torn off and pasted directly.
Scope of application
The luminous film is cut into different shapes, suitable for use in the following places
The identification position is pasted on the surface of the following locations, such as electrical switches, remote control panels, wall switches, plugs, Sockets, locks, flashlights, door handles, handrails, fire extinguishing equipment, fire alarms, life-saving appliances, etc. can mark their location for easy use
. Safety signs attached to the following locations can serve as safety warnings, such as Emergency evacuation passages, subway stations, underground passages, civil air defense projects, karaoke halls, dance halls, cinemas, supermarkets, hospitals, train stations, airports, docks, etc.
Things to note when using
Construction should be done on a flat surface, and the construction temperature should be ~℃.
. The luminous film can be cut into various shapes and directly attached to certain places (such as telephones, switches, etc.) for decoration and indication purposes.
, screen printing patterns, text and other methods on the surface of the luminescent film to form a substrate that emits light.
. Before attaching it to the surface of the object, the surface of the object should be cleaned first. There should be no oil, dust, etc. on the surface.
This luminescent film has a certain degree of thermal expansion and contraction. The sliced luminescent film cannot be placed randomly. It should be clamped or pressed with heavy objects to prevent deformation and curling.
When using, remove the release paper from the back of the luminescent film, apply a certain amount of pressure to the luminescent film and stick it flatly on the surface of the treated object, paying attention to the corners.
The same type of luminous film will have certain color differences in different batch numbers to ensure luminous brightness.
If the luminous film roll exceeds the length, there may be joints.
． Unused luminous film (rolls) should be bundled as tightly as possible.
Packaging and storage
Packed in roll or sheet form, externally packaged with plastic film.
,Storage ※Should be stored in a ventilated, dry, and cool warehouse, with a storage temperature of ~℃ and a relative humidity of less than %.
WhatsApp
