D type international shore flange joint (40 50 65)

型号：

DG

规格：

40 50 65

认证：

CCS

Type international shore flange joint ( ) ) is made of copper in accordance with the requirements of the 2018 Amendment to the International Convention for the Safety of Life at Sea. The working pressure is. One end is a flat flange, and the other end is a permanently attached interface that matches the fire hydrants and fire hoses on the ship. The interface specifications can be divided into and and can be used on all types of ships.

Type international shore flange joint ( )
One end of it is a flat flange. This device is a unified standard internationally used international shore flange joint. The other end is a permanently attached, with The interface between the fire hydrant and the fire hose on the ship, the international shore connection interface is consistent with the interface between the ship's own fire hydrant and the hose. All ships must be equipped with at least one international shore connection. When the ship's fire pump fails, the international shore joint is used to introduce fire water from the shore or other facilities into the ship's fire piping system to continue to extinguish the fire.

International shore connection
shall be made of steel or other equivalent material and designed to withstand the working pressure of ./. The international shore connection shall be kept on board the ship together with a gasket of any material suitable to withstand the working pressure, the international shore connection together with nuts and washers of diameter and length

Ship shore connection
Main technical parameters
Outer diameterbr/>Inner diameterbr/>Bolt ring diameterbr/>Flange notch diameter
Flange thicknessbr/>Bolt and nut pairs, each pair The diameter is and the length isbr/>