Electric commercial grain mill, mill supplier

Working principle
)
When the motor of the grinding mill starts to run, the connecting shaft and the grinding disc sleeved on the connecting shaft run together. The material to be ground enters the grinding sleeve from the hopper. The relative movement between the auger of the grinding plate and the grinding sleeve causes the material to be crushed into small particles by the crushing force. The small particles after grinding are crushed by the spiral motion of the auger of the grinding plate. It is brought into the middle of two grinding discs, and the relative movement of the teeth of the grinding discs causes the material to be crushed into fine powdery particles in a short time. The powder flows out from the tooth grooves of the grinding discs and is thrown around, and is installed on the grinding disc at the same time. The powder scraper is brought down and flows out from the powder outlet. Clean and hygienic throughout.

) .Advantage Description
)

br/>The new mill no longer uses low-power motors, with two powers of . and , only. A power. The motor shaft of the new mill is lengthened. Unlike the old model, which uses another shaft to cover the motor shaft, it further ensures concentricity. The machine runs more smoothly, with less vibration and less noise.
br/>A silicone pad is installed between the static grinding disc and the machine wall, which has the effect of shock absorption and fine-tuning the grinding disc, so that the two grinding discs fit better, the grinding powder is finer, and the noise is reduced.
br/>In the new grinding mill, rubber pads are installed between the motor and the motor fixing plate and under the motor fixing plate to further enhance the shock absorption and noise reduction effects.
br/>The door cover of the new grinding mill and the cavity are closely processed and matched with steps to ensure no powder leakage, ensure the concentricity of the regulator top pad and the grinding plate hexagonal sleeve, and reduce the wear, reduce vibration and noise.
br/>The slope of the crushing chamber of the new grinding mill (i.e. the installation position of the static grinding disc) is scientifically designed to further ensure the fineness of the grinding powder and achieve the taste effect of melting when imported.
br/>The adjuster teeth of the new grinding mill adopt an advanced machining center to ensure processing precision and achieve the effects of convenient adjustment, tight fit and low noise.
br/>After the grinding disc of the new mill is equipped with grinding discs and scrapers, it undergoes computer dynamic balancing testing to further ensure the concentricity and center of gravity balance to minimize vibration and noise.
br/>There are no bearings between the base and the motor of the new grinding mill, which facilitates disassembly and assembly by customers, reduces the occurrence of malfunctions, and improves the quality of the machine.
br/>The new grinding mill achieves the effects of smooth material discharging, very fine grinding, and much less noise and vibration than the old model.
br/>
New grinding mills, each comes with a gift package worth RMB 1,000, including auxiliary grinding discs (the machine itself comes with auxiliary grinding discs), stainless steel cutting rods, and stainless steel wire brush handles , Nylon brush handle, Allen wrench handle, stainless steel feeding spoon handle, current overload protector (motor only), bearing. The above accessories are convenient for customers to operate, clean, use, and replace. They are fully equipped and can be used with more confidence.
)Technical Parameters
Model
Number
Electricity
Voltage
Frequency
Rate
Power
Power
Rotation
Speed
Production capacity
Dimensions
Weight
Volume

/


/
/



/


/
/
**