Will the price be cheaper if Baoding Wire and Cable Factory directly wholesales wires?

Baoding National Standard Wire and Cable Sales Center reminds you how to distinguish national standard and non-standard wires and cables. You must choose national standard wires when using wires. So, how to distinguish national standard and non-standard wires and cables?
It is recommended that you take a look and try again. , three weighing, four comparing prices, five looking at copper quality, six quality testing, and six tricks to tell the truth.
First check to see whether the wire and cable product has a quality system certification, whether the certificate is standardized, whether there is a factory name, factory address, inspection seal, production date, and whether there are trademarks, specifications, voltages, etc. printed on the wires. . Also look at the cross-section of the copper core of the wire. High-quality copper is bright and soft in color, otherwise it is a defective product.
For the second test, you can take a piece of wire and bend it repeatedly with your hands. If it feels soft, has good fatigue resistance, has high plastic or rubber feel and has no cracks in the wire insulator, it is a high-quality product.
Three-weight wires and cables with good quality are generally within the specified weight range. For example, the commonly used plastic insulated single-strand copper core wire with a cross-sectional area of . Poor quality wires have insufficient weight, are either not long enough, or have too many impurities in the copper core of the wire. If it is a cable, especially a large-sized cable, the simple method of weighing it can best reflect whether the copper content of the cable meets the standard and whether the conductor cross-section meets the standard. Generally, copper is stolen to make a small-section cable. If the cable If the copper content does not fall within the weight range of the allowable error stipulated by the state after weighing, it can basically be regarded as non-standard.
Four better prices Since the production cost of fake and shoddy wires is low, vendors often sell them at low prices under the guise of low price and high quality, which deceives people. Therefore, when purchasing, be careful not to be dazzled by the high quality and low price advertised by the merchants, and end up being deceived. Five, look at the copper quality. The copper core of qualified copper core wires should be purple-red, shiny, and soft to the touch.
5. Look at the copper core of fake and inferior copper core wires. The copper core is purplish black, yellowish or white, with many impurities, poor mechanical strength and poor toughness. It will break with a little force, and there are often disconnections in the wires. . During the inspection, you only need to peel off one end of the wire, and then rub it on the copper core with a piece of white paper. If there is black substance on the white paper, it means there are more impurities in the copper core, and it can be regarded as a non-standard wire. cable.
Sixth Quality Inspection: If there are differences in cable quality, it can be sent to a third-party testing agency for testing. Based on whether the authoritative test report is qualified.
Baoding wire and cable price Baoding national standard wire and cable sales contact Mr. Zhang phone number