GJT30K-2 type connecting rod small head heater

Changzhou Juntai
type connecting rod small end heater is used for interference assembly of connecting rod small end in the gasoline engine industry. The connecting rod small end needs to be heated to about
℃, and the expansion amount is
''
Wire can be assembled smoothly (connecting rod small head heater
''/
Connecting rod heater
''/
Connecting rod heating
' '/
Connecting rod small end hot set
''/
Connecting rod small end induction heating), the largest sales company of connecting rod small ends in China, a product with trustworthy quality and technology.
,

.
''
The induction heater uses advanced electronic time (or temperature) control circuit, in
''(
or
''
Automatic timing (or constant temperature) based on the set value within the range of ℃). The upper limit of time (or temperature
'')
can be set. When heating the workpiece, when the set upper limit is reached, the heater will automatically cut off the circuit and issue an over-temperature alarm indication. Timing or constant temperature digital display, intuitive and accurate. The operator can know the temperature changes of the inner ring of the heated workpiece and the heating time changes at any time. During heating, only the workpiece is heated, while the heater itself remains at normal temperature. It overcomes the problems of channel damage, loud noise, reduced service life and environmental pollution caused by original installation methods such as hammering of workpieces, flame heating, and oil boiling heating.
. 1. Applicationbr/> ''
Series heaters are mainly used for heating bearings, gears, ring gears, motor aluminum shells, pistons, connecting rod small heads
, wheel centers, Various types of metal parts such as wheels are heated and expanded to meet the needs of interference assembly or disassembly.
. 2. Structure and working principle
. ●
''
Structure
''
br/> ''
Series heater It consists of a dry self-cooling power frequency induction heating device (hereinafter referred to as the host machine) and control equipment.
. ●
''
Working principle
''
br/> . ''
, short circuit heating
''
The main machine is a transformer with a special structure, and the movable yoke is used to directly wear bearings or other heated workpieces. When working, when the host power is turned on, a short-circuit current is induced in the workpiece (equivalent to the secondary side assembly) and is heated. . ''
, eddy current heating
''
is heated. The workpiece and the iron core of the main machine form a closed magnetic circuit. During operation, the workpiece generates eddy currents through the magnetic lines of the main machine and is rapidly heated.
. 3. Product Classification
. ''
Rotary
''
Suitable for rapid heating of bearings, rings and sleeves
. ' '
Open
''
Suitable for rapid heating of gears, couplings, bearing seats and other workpieces
. ''
Stand
''< br/> Type
''
Lift-type heater
''(
Suitable for large workpieces with smaller inner diameters
'')
. ' '
Horizontal
''
Type
''
Automatic feed heater (suitable for rapid heating of large workpieces with larger inner diameters)
. ''
Well
''
Style
''
Mainly used in steel metallurgy, railway locomotive industry, bearing inner sleeves, wheel hoops, dust rings and other workpieces to quickly Disassembly