Electric milling machine_Three-phase power supply 7.5Kw hand-held electric milling machine information/price

作业宽度：

250毫米

铣刨深度：

15毫米

工作效率：

每小时150平米左右

An electric milling machine is a milling machine powered by a motor. It uses a three-phase power motor and is directly driven or milled by a belt drive. The electric milling machine has the characteristics of easy operation, abundant power, flexibility, and ease of movement. Features and requires no special maintenance after daily use! From an economic point of view, the operating cost of electric milling machines is also very low. The working principle adopts the forward cutting working principle (reverse cutting is also possible). The electric milling machine relies on the motor to drive the cutter drum to rotate, and uses the power generated by high-speed rotation to swing The blade on the cutter shaft strikes the ground continuously to achieve the effect of crushing and cutting the ground
Working width Milling width (type is mm), maneuverable and flexible
Milling depth can be adjusted freely Planing depth
The walking speed is equipped with a manual speed adjustment device, allowing you to freely adjust the speed
The number of installed knives The whole machine is equipped with an alloy blade with 1 tooth, and the surface after milling is fine and smooth
Powered by electric milling The planer uses a three-phase power supply. The motor is the power source and has plenty of power! Concrete above the mark can be easily removed to ensure that the machine can work continuously for a long time
Control the switching power supply start, pause, emergency stop, main power and other safety mutual control switches to ensure safe construction
Work efficiency is based on different marks Concrete can be milled about square meters per hour, with high work efficiency
Performance Features The body link of the electric milling machine is integrally welded, which ensures that the body will not deform or twist under strong vibration conditions! It is equipped with a guide wheel in the front and two running wheels in the rear. It can move forward and backward freely, and the steering is flexible. It can adapt to various small-scale or small-area site construction, and is not affected by the season or environment. It has the characteristics of maintenance-free and easy maintenance.
Project cases have been widely adopted and used by major China Railway Bureau, Port and Shipping Bureau, China Communications Administration, China Construction Bureau, China Tunnel Group, Road and Bridge Group, etc. (There are too many users to publish them one by one. If you need detailed information For project case information, please contact us)
// Electric milling machine // Electric milling machine