About concrete milling machine_Introduction to NJ250 walk-behind concrete pavement milling machine

作业宽度：

250毫米

铣刨深度：

15毫米

工作效率：

每小时150平米左右

Concrete pavement milling machines are divided into two types: electric concrete milling machines and fuel-powered (motor-type) concrete milling machines, commonly known as concrete milling machines. Electric concrete milling machines use a type three-phase power supply. The motor is the power. The fuel-powered concrete milling machine is powered by a Briggs & Stratton horsepower engine and uses the working principle of forward cutting to perform milling operations! The concrete milling machine has good and simple performance. People without construction experience can still operate it, and it is very safe! It can be adapted to large-area field operations, and can also be used for site construction in small areas or small areas. It has the characteristics of maintenance-free, easy maintenance, simple operation, convenient movement, and abundant power. It does not require special maintenance on a daily basis
Milling width Milling width (type is, type is), maneuverable and flexible
Milling depth The milling depth of the concrete pavement milling machine can be adjusted at will from to
The walking speed is equipped with a manual speed adjustment device. Speed and speed
The work efficiency depends on the concrete of different grades. It can mill about square meters per hour, and can easily remove any grade of concrete floor
The blade configuration type is equipped with a tungsten alloy blade with individual teeth (type Equipped with blades), the service life of each pair of blades is about square meters (the type is about square meters). After milling, the surface will form a uniform, rough (or delicate), smooth pitted surface! It can be used as an anti-skid layer or as a new layer for re-paving to strengthen layer connections
Structural Performance The body link of the concrete milling machine is integrally welded to ensure that it can work under strong vibration forces so that the fuselage does not deform or twist! It is equipped with a guide wheel in the front and two running wheels in the rear. It can move forward and backward freely, and the steering is flexible. It can be adapted to various small or large area construction sites. It has the characteristics of maintenance-free and easy operation
Scope of application Concrete pavement Milling machines are mainly used for milling or flattening elevated concrete floors. They can also be used to roughen solidified concrete floors. They can also be used to clean residues on building floors, remove floating slurry on concrete surfaces, etc. and are widely used. Beam or bridge deck paving, bridge deck roughening, staggered platform leveling, elevation of high-speed rail beams and track base plates, old road renovation, damaged ground repair, as well as underground garages, public squares, large factories, and warehouse floors Waiting for construction work on concrete sites
Compare three companies with the same quality and price! Same price than quality! Welcome friends in the industry to call for consultation and trial
// Milling machine. Picture // Electric type