Year1
- 扬程：
- 30-50
- 功率：
- 5.5-22kw
- 电压：
- 380-1140v
B-/Pneumatic double-liquid grouting pump for mining
B Pneumatic grouting pump This product is mainly used in coal mines, tunnels, water conservancy, and bridge construction. It is used for grouting to block water, fill gaps, and break rock formations. grouting reinforcement. Suitable for grouting foam expansion materials to reinforce broken strata and fill gaps. Through the suction and discharge of the pump, the foam expansion material is mixed at a certain volume ratio under pressure and reacts quickly to form expanded foam. The pump can be used to extinguish fires and block water in coal mines.
B pneumatic double-liquid grouting pump can be used for anchor support grouting in underground tunnels, advanced guide rod support grouting for tunnel excavation, well wall water blocking and broken rock consolidation grouting, water conservancy embankments and railway roadbed reinforcement Grouting. In recent years, it has been equipped with supplementary grouting on the back of the shield link, and the effect is outstanding.
Model: B-/type pneumatic grouting pump;
B&;&;Type code: Plunger grouting pump for coal mines;
&;&;Feature code: Power source type: Pneumatic &;&;Double liquid
/&;&;Main parameters: Lower slurry discharge flow rate (/)/slurry discharge pressure ().
Technical parameters of B-/type pneumatic grouting pump
Air source pressure: .&;.;
Number of reciprocations/min:
Air consumption/: &;.
Breath pipe diameter:/, or type quick connector
Slurry suction pipe diameter:/
Slurry discharge pipe diameter:
Mixing ratio::
Rated pressure (gas Source pressure.):
Rated flow (slurry discharge pressure)/:
Product model B-./.
Air supply pressure. -.
Rated pressure.
Rated flow rate./
Air consumption/
Conveying distance
Machine weight
Overall dimensions&;&;
Pneumatic grouting pump series: B-/, B- /, B/, B-/, B-/, B-/, B-/, B-./., B-/Pneumatic grouting pump
Double liquid grouting pump series: B-/, B /,B-/,B-/,B/,B-/,B-/,B-/,B-/,B-./,B-./,B-/Pneumatic double-liquid grouting pump for coal mines
Model B-/
Air source pressure-.
Air consumption/
Mixing ratio:
Rated pressure (air source pressure.)
Rated flow rate/
Quality
Dimensions**
B-type pneumatic grouting pump is fully pneumatic, capable of single and double liquid grouting, pressure adjustable grouting pump; pneumatic grouting pump design structure It is simple, stable and reliable in performance, reliable in use, long in life, small in size, light in weight, flexible and reliable, and widely used. It is easy to move and carry, and is suitable for multi-point grouting that moves frequently.
Type B pneumatic double-liquid grouting pump adopts pneumatic transmission and has advanced gas distribution and reversing device technology. The gas distribution and reversing action is sensitive and can change the flow rate of compressed air for stepless speed regulation. The grouting performance of the pump is very suitable for large flow rates when the grouting pressure is low, and for small flow conditions when the grouting pressure is increased. Due to the use of pneumatic transmission, it can also be used in flammable, high-explosive, water-spraying, dusty and other working environments. It can be used under conditions with strict grout ratio requirements. One pump can be used to achieve double-liquid grouting, which greatly reduces the cost of purchasing construction equipment. The grouting pump can be placed directly on a relatively flat ground; the inlet and outlet of the pump adopt quick-plug interfaces. , it is convenient and quick to connect the suction and discharge pipes, and the sealing is reliable; the pneumatic motor drives two pistons, and the piston area ratio between the motor and the two pistons is: The cylinder piston reciprocates because the cylinder tie rod is connected to the slurry cylinder tie rod, so the cylinder piston reciprocates At the same time, it also promotes the reciprocating motion of the slurry cylinder piston to complete the suction and discharge of slurry to meet the requirements of continuous grouting.
Factory address: Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Consultation phone:
Online:
WhatsApp
