Manufacturer of large horizontal pipe bending machine, iron pipe stainless steel pipe bending machine

< . -. brr brr:brr Usage
Edit
. Usage of manual hydraulic pipe bending machine: Hydraulic pipe bending machine is mainly used in electric power construction, highway and railway construction, boilers, bridges, ships, furniture decoration, etc. Pipe laying and repair have the advantages of multiple functions, reasonable structure, simple operation, convenient movement, and fast installation.
.
< . -. brr brr:brr Features
Edit

-b. - The pipe bending machine adopts touch screen and CNC module conversational operation The program setting is simple and easy
.
-b. - The bed structure is stable and not easy to deform.
.
-b. - Each gear can set r bending angles and the memory can store r sets of files.
.
-b. - , equipped with slow speed positioning function, stable bend angle and repeatability up to r&;.&;
.
-b. - , error message on the screen The display helps the operator troubleshoot immediately.
.
-b. - We provide self-developed coordinate conversion bending pipe processing value software, which can be purchased and installed on a desktop computer for editing and calculation.
.
< . -. brr brr:brr Rules during operation
Edit

-b. - When the machine tool is started, be careful that the human body is not allowed to enter the rotating arm and sweep through it. range.
.
-b. - When the machine tool is working, all personnel are prohibited from entering the space swept by the rotating arm and pipe fittings!
.
-b. - The machine tool hydraulic system uses ordinary hydraulic oil (original brand R). Under normal circumstances, the oil filter must be replaced once a year and must be cleaned at the same time.
.
-b. - When adjusting the machine tool (mold), the adjuster should press the button himself. Never allow one person to adjust the machine tool while another person is working on the control cabinet.
.
-b. - The core rod should be removed when adjusting the machine tool or running the machine empty.
.
-b. - The hydraulic system pressure cannot be greater than r.
.
-b. - When manually adjusting the speed of the side thrust cylinder, the arm should be adjusted when it rotates to r. The adjustment speed is the linear speed of the edge of the elbow mold when the arm rotates. Synchronization is prohibited in the manual state. The pushing speed is greater than the linear speed of the rotating mold edge.
.
-b. - Generally, after using the machine for a period of time, the tension of the chain should be checked to keep the upper and lower chains consistent
[]

.
.
-b. - During automatic operation, before the bending arm returns in the core bending mode, the operator must ensure that the core head is inside the tube or ensure that the mandrel is not blocked when the bending arm returns, otherwise the core The head or core rod may be bent or broken.
.