Yidu City famous brand original wooden door agent franchise | Original wooden door manufacturer address | Bathroom original wooden door price

Yidu Famous Brand Original Wooden Door Agent Franchise | Original Wooden Door Manufacturer Address | Bathroom Original Wooden Door Price 1: Installation Method of Wooden Door Frame:
, Unpack the packaging box of the overall wooden door cover and check various components: a &; long top plate contract .Long vertical boards, door frame lines, front door frame lines, rear door frame lines, silent strips, door stop lines, fixed iron sheets, expansion screws, wood screws, etc.
. There are already processed fixing openings on one side of the two vertical boards and one top board, and two small holes are drilled to facilitate the fixation of wood screws; the countersunk holes are drilled on the side and expansion screws can be used for installation. fixed. Make sure to secure the top and side frames with wood screws after alignment.
. Place a temporarily fixed piece of wood underneath for auxiliary correction to make the door frame roughly vertical and square. The door frame is installed.
2: Wooden door installation procedures:
, Yidu famous brand original wooden door agent franchise | Original wooden door manufacturer address | Bathroom original wooden door price Assembling the door frame: () Use a diameter. electric drill on the flat and smooth ground to drill the mullions. Lead deep nail holes at the upper end and use long nails to firmly connect the horizontal frame to the two mullion frames; () Fix connecting pieces on both sides of the mullion frame; () Place the assembled door frame on the ground&; Turn over and use round nails to fix the other connecting piece; () After checking that they meet the requirements, pre-join the door leaf and the door frame (the side with the opening). The gap between both sides of the door and the door frame is required to meet the requirements.
, The door frame and the wall are connected and fixed: () Move the firmly assembled door frame into the door hole; () Use the nail holes of the connecting piece as points to determine the twelve drilling points on the wall; () Use - Diameter Use an electric hammer to drill holes in the holes, then nail the holes into the wooden wedges and use nails to fix the connecting piece on the wall; () Insert wooden strips into the gaps between the fixed door frame and the wall to achieve both Not too tight but not too loose so that the door frame is connected to the wall.
. Install the door leaf: () Do not damage the decorative surface of the set door during the operation of picking the hinge groove; () Install the hinge. Before driving the wood screws, first drive the nail holes and then drive the wood screws and tighten them; () Install the door lock.
. Install the door cover wire and door rails: () Both the cover wire and the rails are equipped with concave installation nail grooves. Use Yuan Nail to fix the door cover wire shell and the door rail shell on the door frame, and then use glue to fix the door cover wire. The batten core and door strips are installed on the sleeve shell and door strip shell; () the door cover lines and door strips should be cut at a 20-degree bevel. Yidu City famous brand original wooden door agent franchise | Original wooden door manufacturer address | Bathroom original wooden door price