Supply mold single head heating tube

型号：

齐全

规格：

定做

功率：

定制

Design requirements for the single-head heating tube of the mold. Steel heating is a heating method that must be used in the design of almost all plastic molding molds. It can be designed in various forms such as one-way wiring, two-way wiring, etc. The material can be stainless steel seamed pipes, stainless steel seamless pipes, etc. It is characterized by small heat loss, high thermal efficiency, simple wiring, and flexible design or wiring according to needs.
Due to the limitations of the material and processing technology of the single-head heating tube of the mold, attention should be paid to its own characteristics in the design:
Generally, the heating tube of the mold usually has longer cold ends at both ends and cannot play a heating role. . Therefore, it is recommended to use the single-head heating tube produced by our company for imitating imported molds. Its characteristic is that it has only one cold end. The cold end is smaller and is generally on the left and right.
The power design of the general mold heating section should not exceed watt/ cm limit. For example, the power of a centimeter-long heating tube should not exceed watts as much as possible. If the design power exceeds this limit, the surface load of the heating tube is high and the steel tube is prone to oxidation and corrosion, causing short circuit.
Design and customization of single-head heating tube imitation imported mold:
.Voltage, power.
.Pipe diameter size: can be made according to customer requirements.-.
.The length of the tube body: non-standard customization (minimum).
.The material of the electric heating tube: the main materials are carbon steel, stainless steel with coating (anti-scale treatment), (commonly known as:), titanium tube, etc.
.Selection of electric heating wire: generally iron-chromium-aluminum wire (Beijing Shougang), nickel-chromium wire (generally, resistance wire, etc.). The choice between the two depends on the customer's working environment (temperature and vibration).
.Others: working environment, terminal or lead length (general:), whether installation threads are required (thread size), diameter and length of metal hose, etc.