Bumper car price, Tiandi.com bumper car manufacturer

The Zhengzhou Xileduo bumper car manufacturer writes about the installation and debugging methods of bumper cars in an attitude of being responsible to its customers. Here, I mainly use the ground-grid bumper cars as an example. I hope that the majority of friends who are experienced bumper car campers can learn something from it. .Insert the special key into the electric control lock and turn it clockwise. At this time, the "power indicator light" turns on. Press the "start button" and the operation indicator light turns on. Make appropriate adjustments to the current working voltage through the voltage regulating switch on the panel of the electric control cabinet. Adjust the working voltage of the bumper car to - The working voltmeter on the cabinet will correspondingly indicate the voltage value supplied to the upper and lower electrodes on the car park. At this time, if there is a bumper car started in the parking lot, the working ammeter will have corresponding current indication. Press the "Emergency Stop" button, which will automatically lock the electrical control cabinet and immediately stop sending out DC power. To restart the electric control cabinet to send out DC power, the "emergency stop button" must be unlocked in advance (method to unlock: hold the "emergency stop button" and turn it clockwise). The timing control operation time of the bumper car electric control cabinet has been set before leaving the factory. If it is set to minutes, the user can adjust the required time if he or she needs to increase or decrease the running time (all power needs to be cut off when adjusting the time). The overcurrent protection device installed in the electric control cabinet has been debugged before leaving the factory and the user does not need to make any adjustments. Phone: