Shandong Jining manufacturer sells DYTZ electro-hydraulic actuator

Shandong Jining manufacturer sells electro-hydraulic push rods, electro-hydraulic push rods, hydraulic push rods, Guolong electro-hydraulic push rods, electro-hydraulic push rods, that is, electro-hydraulic push rods, which are suitable for reciprocating push and pull linear (or reciprocating rotation at a certain angle) motion, and can be used for rising and falling. Or places where work is clamped, it can also be used in remote and high-altitude dangerous areas, and can be networked with computers for centralized (program) control. Now it is widely used in metallurgy, mining, coal, electric power machinery, food, cement, chemical industry, water conservancy and transportation and other departments. It is an indispensable universal power source. Working principle:

The electro-hydraulic push rod uses an electric motor as the power source, and the electric motor rotates in the forward (reverse) direction, so that the hydraulic oil outputs pressure oil through the two-way gear pump, and is sent to the work through the oil manifold block. The oil cylinder realizes the reciprocating motion of the piston rod. Advantages:

Has automatic overload protection function: When the electro-hydraulic push rod is working, if the external force on the piston rod exceeds the rated output force or the piston has reached the end point, the motor is still rotating. At this time, the oil circuit When the oil pressure increases to the set pressure, the relief valve overflows quickly and accurately to realize automatic overload protection. Although the motor is rotating, it will never burn out. Self-locking function: A pressure self-locking mechanism is designed in the oil circuit integrated block of the electro-hydraulic push rod. When the motor stops rotating, the piston rod immediately stays in a certain position, and the pressure oil is in a pressure-maintaining state. Stepless adjustment: Stepless adjustment can be made within the rated speed output force and stroke range according to user requirements.

Model Description The electro-hydraulic push rod is mainly composed of six basic elements including the type of the push rod, the protection level of the motor, the rated output force, the stroke, the rated speed and the angle of use. It can also be equipped with three supporting elements according to the special requirements of the customer. Adjustment functions, namely: speed adjustment, push-pull force adjustment, stroke adjustment (stroke switch positioning). Except for the above three adjustment functions, which must be clearly stated when ordering, please refer to the model preparation method and fill in the six major elements carefully. Type integral straight electro-hydraulic push rod technical parameters (selection table)

Model rated output force rated speed (/) motor model stroke manufacturing range stroke manufacturing range

Thrust pull Force push speed pull speed

/

/

/

/

/

/

/

/

/

/
< br/>/

/

/

/

Note: The voltage levels of the motors listed in the above table are , the protection level is , and the insulation level is Class B. If it exceeds the stroke manufacturing range or speed manufacturing range listed in the table, please indicate it separately. Otherwise, it will be manufactured according to the technical parameters in the table. The speed range in the table is for horizontal use. The speed for upward or downward use is half of that for horizontal use. The typical numbers and powers listed in the table indicate the power of this type of push rod when the rated output force and rated speed are at the maximum value. Motor power is directly proportional to the push rod thrust speed.