Year1
- 单瓶：
- 1900*600*450mm
- 双瓶：
- 1900*900*450mm
- 三瓶：
- 1900*1200*450mm
Gas cylinder cabinet Preface:
The prevention of fire and explosion accidents is a delicate and complex task. When flammable gases are in the air or mixed with other gases When the mixture reaches a certain proportion, it will cause serious harm to personal safety and equipment, and may even cause fires and explosions. The gas cylinder cabinet is a safety protection product that stores various productive or daily substances or materials<>The most direct function of the gas cylinder cabinet is
It is used to improve local exhaust ventilation protection<><>Cylinders
(<><>Gas Cylinder
) A metal container that is protected from fire outside the cabinet and that protects surrounding objects from fire inside.
1. Basic attributes of gas cylinder cabinets:
Product name: all-steel gas cylinder cabinet
Brand<>: Westjet
Color: off-white
Surface: strictly inspected After pickling and phosphating treatment, epoxy resin electrostatic spraying and corrosion-resistant treatment
Product technical parameters:
Single-cylinder gas bottle cabinet: **, single-door manual
Double-cylinder gas bottle cabinet : **, double-door manual
Three-cylinder gas bottle cabinet: **, double-door manual
2. Basic attributes of the gas bottle cabinet:
Cabinet body: Made of thick Baosteel high-quality cold-rolled steel plate After pickling and phosphating, the surface is electrostatically sprayed with epoxy resin to achieve anti-acid, alkali and anti-rust effects. <>
.
Door panel: It adopts detachable hinges and has a window on the front. The window is explosion-proof glass. <>
.
Hole: There are holes on the side of the cabinet to ensure the flow of gas inside the cabinet. <>
.
Fixed chain: A fixed chain is used internally to prevent the cylinder from tipping. <>
.
Pedal: There is an adjustable pedal at the bottom of the cabinet to facilitate the loading and unloading of gas bottles. <>
.
Handle: Use embedded high-strength handle. <>
.
Alarm: You can choose to use a special alarm device. The alarm device can identify: flammable gases such as methane, acetylene, coal gas, etc. <>
.
Acoustic and visual alarm system: When the sensor in the cabinet detects a gas leak, it will automatically trigger a red light flash and an alarm roar while automatically exhausting the air. <>
.
Automatic exhaust system: When the sensor in the cabinet detects gas leakage and alarms, the top fan will automatically work to discharge the gas outside through the exhaust duct to ensure personal safety in the work area
Special reminder:
Equipped with alarm system and automatic exhaust system; the alarm uses a microcomputer timer switch and a high-sensitivity probe to detect air leakage and automatically exhausts the alarm; the alarm device can identify; flammable gases such as methane, acetylene, gas, etc.; alarm concentration; /~/ of the lower limit of gas explosion concentration (<>); advanced laboratory special gases adopt imported high-sensitivity detection systems that can identify nitrogen, sulfur dioxide, nitric oxide, alkaline gas carbon dioxide and other gases;
3. Microcomputer time How to use the control switch:
Adjusting the clock
: Press and hold the &; clock and simultaneously press the &; hours, minutes, and day of the week keys to adjust the clock and day of the week.
The timing setting steps are as follows:
rSteps
> Buttons
> Setting items
r< br/> >
Press &; Timer
>
Enter the setting of group <> timer on (display on)
r
> < br/>Press &;week, hour, minute
>
Set the turn-on time (day, hour, minute)
r
> Press &;Schedule< br/> >
Enter the setting of group<> timer off (display off)
r
>
Press & day, hour, minute
/> >
Set the off time (week, hour, minute)
r
>
Repeat &;<>,,, steps
>
Can set<>-group switch time
r
> Press &;Timer repeatedly
>
Check each group switch time and day of the week Is it the same as the required
If it is incorrect, repeat the steps<>,
r
> Press &;Auto<>/Manual
>
Add the switch symbol &;▼ to the state at the current time (&;on or &;off) and then return it to the &;automatic position
r
> Press &;Clock
>
End time setting and enter the clock display state
Note:
If you do not need to set the <> group Use the "Cancel/Restore" key to eliminate the excess number of groups from the display: "r" means elimination. If you press the "Cancel/Restore" key again, the original time setting before elimination can be restored.
Check:
Press the &; timing key to check whether the time and week set for each group are correct.
Modification
: Press the &;timing key to the timing group that needs to be modified, press the &;Cancel<>/Restore key to delete the current setting, and then follow the steps related to timing setting to reset the group's switch time (week, day, etc.) Hours, minutes)
Manual control:
Press the &;Manual<>/Auto key to directly &;turn on and off the power.
Press the clock key when the clock is not displayed or do not press any key for <> seconds to save the current settings and return to the clock display state.
If you need daily control cycle
Please be sure to set the timing time (on and off) to the full day display state.
Photo_Copy
WhatsApp
