Supply PI36 bio-alcohol oil emulsifier, how to prepare bio-alcohol oil

Bio-alcohol oil emulsifier (additive) is a high-strength catalyst that can effectively increase the caloric value of bio-alcohol oil. Adding %% can increase the calorific value of the original bio-alcohol oil and minimize the emission of toxic gases. Methanol molecules are more stable, thereby greatly reducing volatilization, making the production, storage, transportation and use of bio-alcohol oil safer. Bio-alcohol oil produced with bio-alcohol oil emulsifier has been widely used across the country for more than 10 years and has received unanimous praise from users. Bio-alcohol oil The use of oil emulsifier makes the production of bio-alcohol oil simpler. Users only need to purchase methanol and do not need to use other chemical raw materials, which greatly reduces the production cost of bio-alcohol oil. Just add emulsifier to methanol and stir for a few minutes. It is bio-alcohol oil with a high calorific value. The use of bio-alcohol oil emulsifiers can lower production costs and save investment. We encourage the use of economical alcohol raw materials such as recycled methanol, waste methanol, crude methanol, waste alcohol, etc., so that small businesses can start their own businesses. It’s a dream. You are welcome to bring your own alcohol-based fuel or methanol samples for testing. Just add a little bit to make your bio-alcohol oil red immediately. You don’t have to worry about customers complaining about insufficient firepower. Just a little bit will make your bio-alcohol oil red hot. The flaming burning of methanol also makes your life flaming! The methanol fuel additive that our company has devoted its research on not only solves the historical problems of insufficient calorific value and large dosage of alcohol base, but also adds %% alcohol-based fuel additive to methanol. , can increase the stability of methanol, reduce volatilization, longer burning time, greatly improve firepower, greatly reduce costs, non-flammable, non-corrosive, safe to use, energy-saving and environmentally friendly, and there is no fuel shortage problem. Alcohol-based fuel is clean, energy-saving and environmentally friendly. The fuel has high oxygen content, complete combustion, no black smoke, no carbon deposits, no black pot bottom, no residual liquid residue, and the exhaust gas emissions after combustion are more than % lower than that of petroleum liquefied gas.
The unique chemical properties of methanol fuel additives can maximize the stability of methanol. Methanol is a very volatile flammable liquid with extremely low stability. At high temperatures, methanol can change from liquid phase to gas phase, that is, methanol vapor. Excessive inhalation of methanol vapor will cause blindness and blurred vision. , the poisoning symptoms of headache and chest tightness are very harmful to the human body. At the same time, large amounts of evaporation will also reduce the quality of the oil and cause waste. Therefore, the properties of methanol must be changed during the production and use of methanol fuel to make it more stable and safer during production, storage, transportation, and use. With the methanol fuel additive, it is simple and safe to produce methanol fuel. Just add %% methanol fuel additive to the methanol solution and stir thoroughly for a few minutes. For example, add methanol fuel additive to the methanol solution and stir for a few minutes.
Methanol fuel additive is a powerful combustion accelerant. It not only has a strong combustion-supporting effect, but also has dual energy to keep the chemical reaction stable. When the combustion temperature reaches a certain temperature, the first-level reaction begins to decompose and release oxygen, deriving the second-level reaction. When the temperature of catalysts such as manganese oxide reaches about 10°C, it enters the next stage of reaction, causing more oxidants to decompose at high temperatures and releasing a large amount of oxygen. The mixed reaction of multiple super-powerful combustion accelerants causes the fuel to start entering the furnace at 10°C. When the temperature reaches about 10°C, the methanol fuel is in a strong catalytic decomposition reaction, allowing the combustibles in the methanol fuel to fully burn. The fire is fierce, the flame is high, and the fire bed is long, achieving the purpose of improving the thermal efficiency of the furnace and super-supporting combustion and energy saving.
Product price: Additive: RMB/kg, minimum batch size per kilogram for sample packaging is RMB per kilogram
New additives: RMB/kg for minimum batch size and RMB per kilogram for sample packaging
Company address: Shuangzhou, Chengdu, Sichuan Province Jiaolonggang Seaside Plaza, Nan Avenue (Head Office)
First Floor, Yayuan Industrial Zone Building, Wanggang Village, Jiahe Street, Baiyun District, Guangzhou City (Branch Office)
Business consultation: Manager Wei