Year1
- 规格：
- 85*1400*380mm
- 材质：
- 钢板
- 型号：
- DS09
Advantages of the new large three-claw wheel lock:
Movable curved arm: will not fall off, and will remain as a whole even when adjusted to the maximum
Handle: Integrated molding, wider and larger, making it easier to stretch the handle freely
Color: Standard traffic yellow color as surface treatment, more eye-catching and more obvious warning effect
Chuck corners: curved edge chuck , avoid edges and corners, don’t worry about scratching clothes or skin
Movable chain: There is a movable chain in the middle of the two fixed curved arms, which will not move away from both sides when moving
Movable universal wheel: lock body Universal wheels are installed on the lower claw feet, which greatly saves manpower during moving operations.
Product specifications: length cm width cm height cm (outer packaging)
Scope of application: large trucks with tons or more, tires of above, such as: dump trucks, container trucks, container muck trucks, etc. truck.
Old three-claw wheel lock:
Color: ordinary yellow, which does not serve as a special warning and is prone to accidents.
Chuck corners: sharp edges and corners, easy to scratch your hands.
Handle: small and narrow, unable to reach in, no point of contact, inconvenient to carry.
Pulley: None. It causes transportation inconvenience and consumes a lot of manpower and material resources.
Movable curved arm: It will fall off when it is moved to the end, and it cannot prevent tool unlocking and theft.
Activity chain: None. When dragging, the arms can easily open and injure people.
How to use the heavyweight three-claw lock
Open the lock cover and take out the movable curved arm
Use the crank handle to open the three curved arms clockwise and adjust the curve of the locked tire. Arm width
Open the two fixed bent arms and push the bottom of the locked tire
Open the lock cover, insert the movable bent arm into the lock plate, hook the movable bent arm to the locked tire, and simultaneously Lift the two fixed bent arms upward and hook the locked tire, close the lock cover
Lock the lock cover with a steel lock, and pull out the key
Insert the crank handle once Use the crank handle socket to tighten the three curved arms and the tire counterclockwise, and the car is locked. Finally, insert the crank handle into the hole of the movable clamp arm and rotate it clockwise to tighten.
Contact person: Li Guangjuan
Phone:
Want Want: Guangxi Xuanqiu: Maomao
Fax:
:
Company address: Nanning, Guangxi Nanguo Trade City Building, No. Baisha Avenue, Jiangnan District, City
WhatsApp
