YW non-clogging submersible sewage pump

Features of the non-clogging submersible sewage pump
The submersible non-clogging sewage pump adopts a unique single-piece or double-blade impeller structure, which greatly improves the dirt passing capacity and can effectively pass fibers twice the diameter of the pump. The substance is solid particles with a diameter of approximately the diameter of the pump.
The mechanical seal adopts new hard and corrosion-resistant titanium tungsten material, which allows the pump to operate safely and continuously for more than hours.
It has a compact structure, small size, low noise, significant energy saving effect, and easy maintenance. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost.
The liquid-type non-clogging sewage pump has a compact structure, small size, easy movement and simple installation.
. It can be equipped with an automatic liquid level control cabinet, which can automatically control the start and stop of the pump according to the required liquid level changes, without the need for special supervision, and is extremely convenient to use.
The liquid-type non-clogging sewage pump has a vertical structure. When working, the pump body is immersed in the liquid, so it is easy to start. There is no problem of exhaust and evacuation. It also has the characteristics of no leakage and the liquid depth can reach meters. .
The shaft connection structure is advanced and reliable. The pump and motor are connected by a coupling. The size of the pump shaft is precise, which ensures the smooth operation of the pump and leaves a sufficient safety factor.
The pump has two types of single-pipe installation and double-pipe installation, and the supporting parts have disc and square disc installations, suitable for different needs.
■
Conditions for use of non-clogging submersible sewage pump
The operating environment temperature of the pump is ℃, the humidity and the altitude are meters. If it exceeds the limit, it should be mentioned when ordering.
, The medium temperature does not exceed ℃, and the medium gravity is ~.
The use range of cast iron material is ~.
Stainless steel material can be used in general corrosive media.
The altitude of the operating environment should not exceed 1 meter. If it exceeds the altitude, it should be mentioned when ordering in order to provide you with more reliable products.
Note: If users have special requirements for temperature, medium, etc., please indicate the details of the conveying medium when ordering so that our company can provide more reliable products.
■
Precautions for use of non-clogging submersible sewage pump
Before use, you should carefully check whether the pump and motor are damaged and whether the fasteners are tightened.
Inspect the pump? Is there any friction sound? The deviation of the outer diameter of the concentric coupling between the pump shaft and the motor shaft does not exceed on the pump body.
Unless there are special circumstances, the pump must be equipped with a fully automatic water pump control cabinet. Do not directly connect it to the power grid or use a knife switch to connect the current to ensure the normal operation of the water pump.
The water pump must be operated in a low-lift state for a long time (generally the lift should not be lower than the rated lift) so that it can be controlled within the recommended lift range to prevent the pump from burning out the motor due to overload.