Recovery method of pyrite associated with Bosite coal mine, pyrite gravity separation equipment, pyrite sulfur separation

Recovery method of pyrite associated with Bosite coal mine, pyrite gravity separation equipment, pyrite sulfur separation

Pyrite, also known as pyrite, is often used in production and potash fertilizer. After firing The pyrite slag can also be used to extract iron powder for steelmaking. There are many methods for selecting pyrite, the most commonly used are gravity separation and flotation.

Pyrite is often in a coarse-grained state, and its specific gravity is..., and the specific gravity of its associated gangue usually does not exceed.... There is a significant difference in specific gravity between the two, so the gravity separation method is used. Good mineral processing effect can be obtained. The commonly used pyrite gravity separation equipment is the jig. Because of its large particle size, wide processing particle size and high recovery rate, it has been recognized by the majority of pyrite beneficiation manufacturers.

The particle size of pyrite can be coarse or fine, so when configuring equipment, it must be reasonably matched according to the embedded situation of pyrite. Coarse-grained pyrite can be crushed to a minimum. To separate pyrite from waste rock, this type of particle size pyrite is best selected by using a C/type jig. For pyrite that is separated from the waste rock after crushing, a C/type jig can be used. The above two Both models are jigs for sorting large-grained minerals. If you encounter fine-grained pyrite, such as crushing it below the required size to separate it from the waste rock, you need to choose a / type or C/ type jig. This The two models are jigs developed for sorting fine-grained minerals. Among them, the C/type jig is also called a trapezoidal jig. It has a jigging chamber and different jigging systems that can be adjusted individually. , used for sorting minerals of different particle sizes, it is currently the mining jig with the largest single processing capacity in China.

Although the jig has many advantages in mineral processing, it is not omnipotent. For those pyrite ores with too fine particles, the processing capacity of the jig is far less than that of the flotation machine. Therefore, when When the particle size of the embedded pyrite is larger than the target pyrite, a flotation machine needs to be used for separation.

Henan Bosite Machinery Manufacturing Co., Ltd. is a manufacturer specializing in the production of jigs. Our factory has rich experience in the beneficiation process of pyrite. In order to facilitate our customers to further understand pyrite For the gravity separation process of ore, our factory has specially set up a small test jig. We can conduct gravity separation tests of pyrite for customers free of charge, and design the mineral separation process and equipment configuration based on the test results. Contact number: