Original American SPORLAN expansion valve FVE-5-Z

FVE-5-Z：

SPORLAN斯波兰膨胀阀

FVE-5-Z：

SPORLAN斯波兰膨胀阀

FVE-5-Z：

SPORLAN斯波兰膨胀阀

& Original American R Spolan Expansion Valve
Hot Gas Bypass Valve
Hot gas bypass valve is an economical method to control the refrigeration capacity of the compressor. It can be used to replace the unloading of the compressor cylinder and can also be used for comparison. Unloading situations with lower cylinder unloading requirements. This adjustable bypass valve can automatically bypass the required exhaust gas to the low pressure side to maintain low evaporation pressure. Regardless of the type of refrigeration or air conditioning system, this type of bypass valve can be used if it is to be operated at low load, but may cause the coil to freeze or the operation cycle is too short.
Selection and rated cooling capacity&&The cooling capacity listed in the table below is the cooling capacity of the hot gas bypass valve, not the cooling capacity of the system using this valve. When selecting a valve, first determine the cooling capacity of the compressor at the lowest evaporation temperature. Secondly, the hot gas bypass valve should be able to make up for the difference between the compressor cooling capacity and the minimum load of the evaporator when the system is running. The set pressure value of a valve is the pressure value at which the valve begins to open.