Thermal oil furnace cleaning agent Shandong wholesale price

PH值：

9

稳定性：

不燃不爆

腐蚀性：

无

Thermal oil furnace cleaning agent is specially used to clean heavy oil scale, oil coke, sludge in thermal oil heat exchange equipment, as well as oxidized oil scale and carbon deposits formed in various thermal oil furnaces. Thermal oil furnace cleaning agent is compounded from a variety of high-quality surfactants and organic additives. It has excellent permeability, emulsification and ability to remove oil coke. It has excellent solubility in water and is simple and convenient to use. , safe and non-corrosive, can be discharged directly after use. When using thermal oil furnace cleaning agent to clean thermal oil heat exchange equipment, it can significantly reduce cleaning costs, save cleaning expenses, reduce environmental pollution, and have a short-term anti-rust effect on the cleaned pipelines. This product has passed the environmental protection test and complies with the EU's R standard.
>Product features:
>Quickly remove grease and carbon deposits on internal pipes and heat exchangers of thermal oil furnaces.
> Neutral, non-toxic and non-corrosive process, completely harmless to the internal pipes of the thermal oil furnace and the metal heat transfer surface of the heat exchanger.
>, dissolves oil dirt and oil coke quickly and completely without leaving any residue.
>. It is simple and convenient to use. No professional is required to operate it. Just follow the instructions for use.
>Concentrated product, use it twice as much as water, which can greatly reduce cleaning costs when cleaning thermal oil furnaces.
> Completely environmentally friendly, the product is odorless, non-toxic, non-flammable, non-corrosive to the object being cleaned, has little irritation, does not damage the skin, and can be discharged directly after cleaning.
>Usage:
Drain the old oil. Use the heating system to heat the thermal oil to ℃, and discharge all the thermal oil in the system while it is hot. According to the conditions, the residual oil in the system can be released as much as possible. If it cannot be released, add cleaning agent to remove the oil through penetration, stripping, and dissolution. After being diluted, it is discharged out of the boiler.
Add the cleaning agent and water to the high-level tank, start the circulation pump for circulation, and use the heating furnace to heat the cleaning agent to ℃&℃. The entire cleaning time is no less than an hour.
Water washing: Fill the system with clean water, turn on the circulation pump for circulation, and use the heating furnace to raise the water temperature to ℃ & ℃, so that all parts of the system can be circulated separately. Rinse the system and, after an hour, open all low-level blowdown valves on the boiler to drain the water from the system. Rinse thoroughly.
Add new oil: Inject new heat transfer oil into the system.
Dehydration: The dehydration method is the same as the dehydration standard before the new system is used.
. Normal operation: The system is put into normal operation.
Packaging and storage: kg, kg plastic drums