Supply Guizhou fully hydraulic imported milling machines, professional manufacturer of road roller milling machines

&Imported Hydraulic Milling Machine
.Uses of milling machine: .Waterproofing and roughening of bridge deck surface, beam surface smoothness and waterproofing of high-speed railway box beams. b. Milling and removal of bumps, ruts, cracks, and potholes on asphalt pavement. Clear ice and snow from bridge decks and roads. c. Before paving the new asphalt concrete, lightly roughen the original old road surface, or use a large milling machine to complete the milling and roughening operations in the corner areas and areas with dense steel bars. .Remove ground coatings, paints, and various traffic markings. When the ground is damaged and dirt needs to be renovated, remove the old floor surface, etc. .Remove airport road markings, aircraft runway tire braking marks, etc., and regain rough surfaces with high friction coefficients. .Milling and leveling the over-elevation parts of cement asphalt pavements, highway bridge decks, bridge staggered platforms, and epoxy resin wear-resistant floors. Road micro-surfacing construction requires milling and removal of the original old pavement surface layer to create a thinner surface. Features of the milling machine for preparing the slurry seal layer: The main shaft bearing adopts the internationally renowned spherical radial bearing, which ensures that the machine can adapt to the working conditions of strong load and high speed. The blade is made of imported high-quality carbide, which is sharp and wear-resistant and has a long service life. The drum It is connected by tensioning sleeves, supported by single-sided bearings with high torque and impact resistance. The machine has good welding performance and is more suitable for adjustable construction depth in the workshop. Just rotate the depth adjustment wheel. .Parameters: Power c=
Honda horsepower traveling mode c=
Number of hydraulic self-propelled cutter shafts c=
Number of blades c=
Blade working mode c=
Upcut depth adjustment c=
Freely adjustable working width c=
& working depth c=
Size c=
**&. The main technical indicators of the milling machine are as follows A few: , engine power. The more power, the better the milling effect. , the number of cutter spindles and the number of blades. The greater the number, the greater the milling depth and efficiency. , the machine's own weight. The heavier, the better to prevent the machine from jumping. , Bearing diameter, if used in high-grade concrete, the bearing diameter should be larger than that, otherwise it will easily break and bend.
Contact number:
:
Landline:
WeChat ID: