Shandong Dongtai's good reputation conveyor guide trough, various guide trough prices, pictures, pictures and models

"He also hopes to help others" On the afternoon of the same day, Wang Zhongkui and his wife burst into tears outside the operating room of Sichuan Provincial People's Hospital. The couple had just made the difficult decision to donate their son's organs to save other people's lives.
On March 1, Wang Meng, a 20-year-old young man from Guangyuan, Sichuan, was involved in a car accident and suffered severe brain injury. Later, he was transferred to Sichuan Provincial People's Hospital for treatment. After diagnosis and treatment by doctors, Wang Meng was seriously injured and his condition was diagnosed as irreversible. At midnight, Wang Meng's heart stopped beating.
After careful decision, Wang Zhongkui and his wife decided to donate their son’s organs to help others.
Wang Meng’s organ removal surgery was completed at Sichuan Provincial People’s Hospital. Before the operation began, all operating medical staff observed a moment of silence to pay high respect to organ donor Wang Meng. Yang Hongji, director of the Organ Transplantation Center of Sichuan Provincial People's Hospital, said that Wang Meng's kidneys, liver and corneas will give him a "new life" and allow the lives of others to continue.
Double sealed arcuate guide trough & fully sealed guide trough & fully sealed guide trough
The function of the guide trough:
The guide trough is mainly used in series belt conveyors and series type For belt conveyors, the guide trough is installed at the material receiving part of the belt conveyor, so that the materials falling from the hopper can be concentrated in the middle of the conveyor belt before reaching the belt speed, and the materials are restrained from being scattered outwards.
The structure of the guide trough
:
The guide trough can be divided into a type with an anti-overflow skirt and a fully enclosed type. If it is a fully sealed type, it consists of upper, middle and lower parts. The middle side plate is connected to the conveyor frame as a fixed part. The upper top cover and lower bottom plate are connected to the side plates through bolts and can be easily disassembled for installation and maintenance. Yanzhou Dongtai's guide trough can be customized according to the specific requirements of customers, and can be processed in sections. For example, the meter guide trough can be divided into sections, each section is meters, and each section uses an outrigger. The front and rear ends of Yanzhou Dongtai's feed trough are equipped with multiple sealing baffles and curtains to form a pressure-equalizing dust sealing and dust reduction system, which reduces, decelerates and settles the dust, allowing cleaner airflow to flow out at the outlet of the feed trough. The entire guide trough of Yanzhou Dongtai forms a closed structure. When the dust vortex creates impact wind pressure on the guide trough, the dust will never overflow and spread.
Sealing performance of the guide trough:
Under the conveyor belt, replace the original trough-type roller set with a short-trough type roller set to support the material gravity part of the conveyor belt. The non-gravity parts on both sides of the conveyor belt are supported by bottom plates with friction-reducing and wear-resistant materials, which not only support the conveyor belt but also serve as a seal. This support bottom plate is connected to the side plates, and the side plates are connected to the top plate. Together they form a shell seal structure. The width of the bottom edge of the guide trough is//The cross-sectional shape of the wide guide trough is divided into two types: rectangular and arc. The design of the guide trough is divided into three parts: the rear baffle, the trough body, and the front curtain. It is installed on the material receiving part of the belt conveyor to restrain the material from spilling out of the guide trough: the material falling from the hopper can be concentrated in the middle of the conveyor belt before reaching the belt speed. The width of the bottom edge of the guide trough is//The cross-sectional shape of the wide guide trough is divided into two types: rectangular and trumpet-shaped. The design of the guide trough is divided into three parts: the rear baffle, the trough body, and the front curtain.

The functions of the fully sealed guide chute:
． The edge rubber sealing belt is made of high-quality natural rubber and is manufactured through special formula and processing technology. It has high wear resistance, aging resistance, high elongation strength, good elasticity, small compression deformation, and the shape is designed as "dovetail plug-in" and inner and outer two-layer double sealing. , which can ensure a high degree of sealing between the conveyor belt and the sealing belt, and is easy to maintain. Yanzhou Dongtai rubber sealing tape uses nylon fiber as the skeleton material and is embedded in the edge rubber sealing tape. In addition to greatly enhancing the mechanical and physical properties, it can mainly double the service life.
． The impact-resistant bracket and conveyor belt seal bracket components are made of high-quality steel plates and special-shaped polymer rubber plates, which are wear-resistant, buffering, non-deformable, fast heat dissipation, small friction coefficient and long service life. The friction and resistance coefficient between the spherical polymer rubber plate and the conveyor belt is very small, smooth and wear-resistant, and will not increase the power load of the conveyor.
． The rubber dust curtain uses the same materials and processing technology as the edge rubber sealing tape, and has the same mechanical and physical properties. It is mainly used at the air outlet of the guide trough to prevent fine dust from flowing outward.
． The outer body of the guide trough is painted with three-coat epoxy resin heavy anti-corrosion paint and sprayed through sandblasting process to prevent iron from swelling, with smooth surface, high strength and high hardness.
Principle of the belt conveyor guide trough:
& Prevent deviation and material scattering: In the traditional belt conveyor trough type roller group, if the resistance of the rollers on both sides is inconsistent, deviation and material scattering will occur. , and the sliding plate material used on both sides of the closed guide trough has the same resistance, so there will be no deviation.
Reduce dust pollution: When the belt moves forward with the material, the air in the closed box is driven forward to form a considerable air volume, so a negative pressure is formed at the discharge point at the end of the guide chute, so there is no longer Dust spillage
Maintenance-free: The closed guide chute has no moving parts except the belt and material (such as bags or water dust removal). At the same time, the structure is reasonable and the manufacturing accuracy is high (slide height difference. mm), especially the resistant ones made by our company. The grinding material adopts special technology to ensure long-term operation.
Shandong Dongtai Co., Ltd. was established in 2001. For more than ten years, the company has been adhering to the quality policy of "quality first, customer first, high-quality products, and excellent service" and has been deeply trusted by the majority of users. The main products of Dongtai Company include: guide troughs, anti-overflow skirts, waterproof closed doors, fire-proof fence doors, buffer strips, buffer beds and other high-quality products
Consultation phone number: Manager Xu
Telephone:
：
&..