1.5mm thick high density polyethylene geomembrane

.Millimeter thick high-density polyethylene geomembrane is welcome to order from Tian Manager
Before laying the polyethylene geomembrane, smoothing must be done. Ensure that the polyethylene geomembrane can perfectly contact the construction surface during the laying process. Another important role of grading work can extend the service life of polyethylene geomembrane. During the laying process, the polyethylene geomembrane can be cut and spliced according to size. The overlapping joints are generally made with special glue or a welding machine to ensure 100% waterproofing. In addition, during the laying process, it needs to be pressed while laying to prevent it from being blown up by strong winds. If you find holes or damage in the polyethylene geomembrane during the laying process, don't panic. Cut and patch it from the side of the polyethylene geomembrane. The area of the scar should be larger than the area of the damaged area.
Try to choose a temperature environment above Celsius for the laying construction date. Try to carry out the construction in an environment with low wind and warm weather. If it encounters rain or snow, the construction should be stopped and the completed parts should be covered and protected.