Supply oil resistant rubber pipe

(1 Product Structure
The steel wire braided hose structure is composed of a liquid-resistant synthetic rubber inner rubber layer, a rubber layer I or II or III, a steel wire braided reinforcement layer, and a synthetic rubber outer rubber layer with excellent weather resistance.
Two product uses
Steel wire reinforced hydraulic rubber hose is mainly used for mine hydraulic supports, oil field mining, suitable for engineering construction, lifting and transportation, metallurgy, forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools, and mechanized automation hydraulic systems of various industrial sectors. It is used to transport petroleum-based (such as mineral oil soluble oil, hydraulic oil, fuel lubricating oil) liquids, water-based liquids (such as emulsions, oil-water emulsions, water), gases, etc. and liquid transmission with a certain pressure and temperature.
Note on this enterprise The steel wire braided hose is designed and produced according to the standard and can be made according to the requirements/RR standard hose. This standard is not suitable for castor oil-based and fat-based liquids.
Three working temperatures: oil ℃ + ℃ air ℃ + ℃ water emulsion + ℃ below If it is exceeded, please choose our factory's special products. Four product features
The hose is made of special synthetic rubber and has excellent oil resistance, heat resistance and aging resistance.
The hose has high pressure bearing and excellent pulse performance.
Pipe body It is soft when used closely and has little deformation under pressure.
The hose has excellent bending resistance and fatigue resistance.
The length of the steel wire braided hose is large, h or more, the fixed length is meters, h or less, it can be up to ten meters or even More than 100 meters.
Technical performance indicators (diameter) of five steel wire braided hydraulic hoses
Technical parameters of single layer steel wire braided hoses
.
Four steel wire wound hose structure types
It is mainly composed of a liquid-resistant inner rubber layer, a middle rubber layer or a layer of steel wire wrapped around a reinforcement layer and an outer rubber layer. The inner rubber layer has the function of making the conveying medium bear pressure and protecting the steel wire from erosion. The outer rubber layer protects the steel wire from damage to the steel wire (h. The reinforced steel wire) layer serves as a reinforcement for the skeleton material.
Product use
High-pressure steel wire reinforced hydraulic hose is mainly used for mine hydraulic supports, oil field mining, suitable for engineering construction, lifting and transportation, metallurgy, forging, mining equipment, ships, injection molding machinery, agriculture It is used to transport petroleum-based (such as mineral oil soluble oil, hydraulic oil, fuel lubricating oil) and water-based liquids (such as emulsions, oil-water emulsions) with certain pressure (higher pressure) and temperature in various machine tools and mechanized automation hydraulic systems of various industrial sectors. Liquid water), etc. and the maximum working pressure for liquid transmission can reach up to.
Note that the standard of the steel wire wound hose of this enterprise refers to the standard DR~Standard. This standard is not suitable for castor oil-based and fat-based liquids.
Product Features< br/> The hose is made of special synthetic rubber and has excellent oil resistance, heat resistance and aging resistance.
The hose has excellent pulse performance under high pressure.
The tube body is tightly integrated and soft when used, and has little deformation under pressure.< br/>The hose has excellent bending resistance and fatigue resistance.
The steel wire wound hose has a fixed length of meters and can be made within 50 meters according to requirements.
Applicable temperature ~ +℃
Technical performance indicators of steel wire wound hydraulic hose
High pressure steel wire wound hose