Shanxi Changzhi hand push multi-head chisel machine

Pavement chiseling machine
Purpose
The chiseling machine is widely used in road and bridge projects, tunnels and box beams, culverts, hydropower stations, dams, nuclear power plants and various types of concrete buildings for chiseling flat, vertical and curved surfaces. Professional chiseling. The chiseling machine does not damage the bottom surface of the concrete and does not affect the strength of the concrete. It has high efficiency, good chiseling quality and little vibration damage to the operator. It is a widely used equipment in the world.
Features
The hand-push ground walking deburring machine is small and flexible in operation. Its deburring head is made of high-quality tungsten steel alloy and has a service life of more than ㎡. The chiseling area per hour can be up to 100% depending on the concrete strength. Square meters does not cause damage to the basic body and has super working ability.
Deputy copy parameters
Model weight
Length and height
Width working width
Number of hammer blows per minute * Air consumption l/min
Noise level decibels decibels Vibration level average equivalent square meters/second
Air compressor
Matching required pressure is kg/cm²
Displacement is cubic meters/minute
Concrete marking work efficiency
Concrete square meters/hour﹫mm
Concrete square meters/hour﹫mm
Concrete
Sqm/hour﹫mm
Technical parameters of deputy copy milling machine
Model
Power configuration
Three-phase asynchronous motor/
Honda gasoline engine
Number of cutter shafts
Root
Number of blades
Bearing seal form
Sealing
One-time milling width
One-time milling depth
Self-weight
Length, width and height
Hourly work efficiency
Square
Contact number
WeChat
Examples of the application of deburring machine
Deburring of bridge deck surface for waterproofing treatment.
The beam surface of the high-speed railway box girder is waterproofed and roughened.
Concrete roughening on the end faces of bridge end beams and side beams.
Remove the ground coating and paint various traffic markings.
Clean and remove airport road markings, aircraft runways, tire brake marks, etc. to regain rough surfaces with high friction coefficients.
Surface treatment of cement asphalt pavement, highway bridge decks, staggered epoxy resin wear-resistant floors, etc.
In road micro-surfacing construction, the original old road surface layer is chipped and removed to prepare for the slurry seal.