CNC band saw machine CNC jigsaw linear saw

H', >Product Introduction

, Fully automatic CNC

, What control is used?

Machine (computer) controlled motion processing

How thick of wood can be cut?

Thickness that can be cut: about the thickest

, how long and how wide can be cut timber?

Conventional machines can cut * wood

Special machines can be customized if there are special needs ( Machine size)

. How many layers of wood can be cut at one time?

As long as the total thickness does not exceed, several layers can be processed

, For CNC band saws What saw blade?

Ordinary band saw blades are enough. Of course, alloy saw blades can also be used, but the cost is slightly higher (an alloy saw blade costs about 1 yuan)

. What is the machine power rate?

The power rate is about kilowatts

Are the accessories imported?

Some accessories are imported from Taiwan B, such as guide rails, linear bearings, balls, screw rods, and some electronic control components

. How big is the machine?

Conventional machines: length, width, height

, mainly used in those product processing ?

Mainly cutting curved rough wood, such as sofas, chairs, bedside and various solid wood furniture cutting work

, is it easy to use? Is programming troublesome?

It must be useful!

Programming is relatively easy. We have dedicated technical staff to teach customers how to program and use the machine.

. How long is the warranty?

The whole machine has a one-year warranty and is guaranteed to be repaired at any time as long as it is not caused by human factors. Consumable parts such as saw blades, bearings, etc. are not included. (If the customer requires extended warranty, we can also agree)

. Does the machine have an automatic refueling machine?

Yes. Fully automatic oil injection machine.

. How efficient is the machine cutting?

Approximately, this question can only be said approximately. A CNC saw can handle the workload of an ordinary sawing machine.

. In what aspects are CNC saws more efficient than ordinary saws and saving wood?

① CNC band saw saves labor and eliminates the process of drawing lines

② Not required To operate the machine, skilled workers only need to find an ordinary worker or female worker to load and unload the materials

③ Multiple layers of wooden boards can be placed at one time for processing. For example, when processing chair legs, you can place the upper wooden board for processing. In other words, you can cut out a chair leg with just one saw. If you cut thin plates, you can put more plates and it will be more efficient

④Details about material saving

, eliminating the error of manual line drawing. The cutting saw path is strictly controlled by the computer, so it has high accuracy and consistency. Therefore, the processing allowance can be reduced (material saving). For example: cutting a wide piece of wood to make a chair back, one piece of board can save one back leg (except for special workpieces, of course), which is a considerable saving, one leg is about RMB.

B. Because the cut workpieces have high consistency, the panel processing is more convenient and less labor intensive

During Lichuang processing, due to the small processing margin left, the safety factor is greatly improved, and workers save more effort in operation.

. How much wood is left after the CNC saw blade cuts the final board?

About millimeters

. Is the saw processing method by rotating the saw machine or twisting the saw blade?

Ours is a saw machine rotation. The advantage of the rotation of the saw machine is: stable cutting and not easy to break the saw blade (breaking the saw blade is a big deal). The disadvantage is that it is larger in size. The advantage of twisting the saw blade is that the moving parts are not exposed and it is more beautiful. The disadvantage is that the broken saw blade is more serious. It is conceivable that repeated twisting of the saw blade at positive and negative degrees will cause the saw blade to break due to the characteristics of metal fatigue, which will reduce the processing efficiency and increase the cost of wearing parts (it is recommended that customers use the saw machine rotation method to prevent the saw blade from twisting. The first-generation product has too many shortcomings. Because this method has been produced by well-known manufacturers, it has caused certain misunderstandings to customers. In short, it is technically an undesirable method)

. Is the machine stepper or servo?

It is fully servo and is the best compensated servo motor in China. Some manufacturers use stepper motor drive. Although the cost is low, it is extremely unreasonable and easy to use. Errors, broken bars, and low efficiency (stepper motors were widely used in CNC machines in ?). Now they have disappeared from the Japanese market, but they are still used in the domestic market, but there are too many shortcomings, so the application of servo motors has Inevitable. Servo motors are the best and most reasonable transmission motors currently used in CNC machine tools.

For the benefit of customers, efficiency and the reduction of our after-sales troubles, To improve credibility, recommend customers to use servo motors as much as possible.