Cast iron floor rail floor rail flat T-slot flat platform T-slot floor rail factory direct sales in stock

材质：

HT250

型号：

齐全

硬度：

HB200

The material of cast iron rails: high-strength cast iron H, the hardness of the working surface is HB. After artificial tempering treatment, the accuracy of the cast iron rails is stable and the wear resistance is good. Advantages of cast iron guide rails: Cast iron guide rails can be spliced into large cast iron flat plates, which saves material costs and takes up very little space. Specifications of cast iron guide rails: They can be made according to drawings according to user needs, or can be designed and customized through negotiation between both parties.
Cast iron ground rail/cast iron guide rail is a cast beam platform that can assemble, test, weld and inspect large-scale equipment. When encountering huge mechanical equipment, several or more ground rails can be spliced together as a Bearing platform is used. Cast iron guide rails are indispensable and important equipment in industry.
The main purpose of cast iron floor rails is to design and splice them into a cast beam platform according to the fixed points of the equipment. It does not need to be made into a large platform, which saves material costs and can occupy a small space. It is very cost-effective. Cast iron Guide rails are mainly used for assembly, testing, welding and inspection of large equipment.
Basic maintenance of cast iron ground rails
In order to prevent the ground rail from deforming, when hoisting the ground rail, four steel wire ropes of the same length should be used to hang the four lifting holes on the ground rail at the same time. The ground rail is smoothly hoisted on the transport vehicle.
. Pad and level the support points of the ground rail to ensure that each support point is evenly stressed and the entire ground rail is stable.
When installing the floor rail, use adjustment pads to pad each support point of the floor rail firmly and have professional technicians adjust the floor rail to acceptable accuracy.
In order to prevent the overall deformation of the ground rail, the workpiece must be removed from the ground rail after use to avoid deformation caused by the heavy pressure of the workpiece on the ground rail for a long time.
When the floor rail is not in use, clean the working surface in time, then apply a layer of anti-rust oil and cover it with anti-rust paper
The floor rail should be installed in a ventilated and dry environment, and Keep away from heat sources, corrosive gases, and corrosive liquids.
The ground rails are subject to regular weekly inspections in accordance with national standards. The verification cycle can be months depending on the specific circumstances