Working principle of electromagnetic pulse valve | National warranty of electromagnetic pulse valve

The electromagnetic pulse valve
controls the opening and closing of the unloading hole of the valve body according to the signal of the pulse controller
to realize the blowing. The signal of the pulse controller is timed in milliseconds. The pulse valve opens to produce a strong impact airflow in an instant. , achieving powerful instantaneous injection. The company's pulse valve products, especially the ZM series quick coupling valve, have been exported to South Korea for four consecutive years. Other pulse valve products are also exported with the complete machine. The quality has won unanimous praise from domestic and foreign customers. The pulse valve diaphragm has a service life of 10,000 times. The pulse valve is installed Standard, correct use and proper maintenance, the service life is years. Various high-temperature pulse valves, anti-corrosion pulse valves (such as anti-hydrochloric acid, strong alkali) and various explosion-proof electromagnetic pulse valves can be made according to actual working conditions. Principle: The diaphragm divides the electromagnetic pulse valve into two air chambers, front and rear. When the compressed air is turned on, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the rear air chamber tightens the diaphragm assembly. Stick to the output port of the valve, and the electromagnetic pulse valve is in a closed state.
The electrical signal from the pulse injection controller causes the electromagnetic pulse valve to move backward, the vent hole in the air chamber behind the valve opens, the rear air chamber rapidly loses pressure, the diaphragm assembly moves backward, and the compressed air is injected through the valve output. , the electromagnetic pulse valve is in the open state.
The electrical signal of the pulse blowing controller disappears, the electromagnetic pulse valve is reset, the vent hole of the rear air chamber is closed, the pressure in the rear air chamber increases, causing the diaphragm assembly to tighten the output port of the valve, and the electromagnetic pulse valve is closed again state.
Contact us by phone, we look forward to cooperating with you!
Contact us