Wood insect repellent Wood insecticide Wood termite prevention

Made of copper-containing natural polymer materials. It is an environmentally friendly wood and bamboo antiseptic, mildew and moth-proofing liquid. It is mainly used for the anti-corrosion, mildew-proof and moth-proof treatment of materials such as wood, bamboo, rattan and crop straw. This product consists of two parts: Agent and Agent B. When used, it is prepared into a light green aqueous solution, which is non-toxic to the environment and human body. It belongs to the third generation of nano-wood bamboo preservatives. The treatment liquid is neutral, does not reduce the strength of the treated materials, and can increase the treatment The bonding performance of the material can be treated by soaking, painting, spraying, vacuum pressure impregnation and other methods. Common wood and bamboo anti-corrosion treatment equipment and processes are used. No investment in new equipment is required. After treatment, the wood and bamboo will turn light green and have a wide range of applications. . Scope of application: ZⅡ can be used for: ① Anti-mildew and anti-blue stain treatment of fresh logs and fresh bamboo ② Long-term anti-corrosion, anti-mildew and anti-moth treatment of dried wood, bamboo and crop straw. After certain processes, the wood and bamboo can be obtained ~years of full protection to prevent wood and bamboo from blue staining, mildew, decay, insect infestation, etc. It can provide good product support for wood and bamboo processing companies and outdoor garden construction companies. Instructions for use: Preparation of treatment solution: When preparing the treatment solution, dissolve the agent in water. Under stirring conditions, dilute the aqueous solution of agent B ~ times, stir evenly, and the finished treatment solution can be obtained. Treatment process: *When using soaking treatment, the material to be processed is completely immersed in the treatment liquid for ~ minutes. *When using brushing or spraying, apply or spray the finished treatment liquid evenly onto the surface of the material to be treated. *When using vacuum pressure treatment, use the finished product treatment liquid. It is recommended that the moisture content of the treatment material be below %, otherwise the treatment effect will be affected. *The processed materials should be placed in a cool and ventilated place to dry naturally, or dried in a drying kiln. *The treated material is light green, which does not affect painting, gluing, waxing and other subsequent processing, and can increase the bonding performance of treated bamboo.