Year1
- 外径：
- 69mm
- 正规长度：
- 580mm
- 耐压：
- 0.1Mpa
< r="://bb.r./////." ="" =" " ="" />
Qiancheng brand_ rb(, , );">Tubular rubber aerator_This product is a new type of tube developed by our company Type rubber aerator. It uses the air supply main pipe and the pilot air tank with a rubber membrane that can open holes for microporous aeration. It has a simple structure, high oxygen utilization rate, reliable performance, no pores are blocked, no sewage is poured back, and the circumferential receiving It has the characteristics of uniform force, long life, easy installation and maintenance, and low system price. This product is the first in China and has reached the level of similar international products. It is the most economical and reasonable aerator among current aerators.
Qianchengpai_ rb(, , );">Tubular rubber aerator_Product structure:
●Using a tubular structure, the tension on the membrane is much smaller than that of disc aeration;< br/> ●Using the pilot air tank structure, the aeration component has no buoyancy;
●The rubber membrane adopts natural rubber and anti-aging formula, and the membrane has a long service life;
●The openings are uniform, large in number, and each The number of holes in the group is up to & (ordinary aeration membranes are holes);
●Using stainless steel connecting fasteners, the interface is not easy to leak and is easy to disassemble.
Qiancheng Brand_Tubular Rubber Aerator_Features:
●High oxygen utilization, uniform air distribution, no clogging;
●Long service life, no water accumulation in the trachea, and stable performance Reliable;
●The installation structure is simple, the aeration pipe has no buoyancy, and the design is easy to use.
Qiancheng brand_ rb(, , );">Tubular rubber aerator The air supply main pipe and the pilot air tank can open holes in the rubber membrane for microporous aeration. Its structure Simple, high oxygen utilization, reliable performance, no pores blocked, no sewage backflow, uniform circumferential force, long life, easy installation and maintenance, etc. The outer diameter and length of the tubular aerator are determined according to user needs, and the general rule is, and. The length below is extruded or molded, and the length larger than that is extruded. The film tube is punched at intervals of size, &., which can produce uniform micro-bubbles with a diameter of -. There is a long pore-free area on the top of the film tube , when the air supply is interrupted, the diaphragm immediately returns to its original state, automatically preventing backflow at the air inlet. The Qiancheng brand_tubular rubber aerator_connector has an air inlet and is connected to the air inlet pipe. The thread is an inch internal thread. The material is B engineering plastic. The liner is for water supply, with a pressure resistance of For measurement, the conditions are: the specification of the tubular aeration pipe is &;&, the water depth, service area, ventilation volume./.
;">
WhatsApp
