Year1
- 产品名称：
- 斜管填料
- 直径：
- Ф35mm
- 长度：
- 1米
rb(, , );"> rb(, , );" >
Qiancheng brand_ rb(, , );">
is based on shallow sedimentation An inclined tube filler for sedimentation tanks designed and developed based on theory. The filler has a large wetted perimeter, small hydraulic radius, good laminar flow state during operation, and particle settlement is not disturbed by turbulence. It can accelerate the separation of particles from water and shorten the sedimentation of particles. distance. Inclined pipes are used in water supply purification and chemical plant sewage, domestic sewage plants, coal mine water treatment, coal washing plant water treatment, power plant concentration tanks, tailings water treatment, pharmaceutical plants, paper mill wastewater treatment for sand removal and rapid sedimentation, In addition to oil separation and tailings concentration, it is especially beneficial for the transformation of water plants and wastewater treatment projects.
Qianchengpai_ rb(, , );">Incline tube packing Features: The sedimentation tank inclined tube filler is made of ethylene-propylene copolymer grade plastic and is made by infrared constant temperature hot pressing. It has accurate dimensions, large specific surface area, safety and non-toxicity, corrosion resistance, aging resistance, smooth wall surface, and easy flushing.
The role of Qiancheng inclined tube packing: The inclined tube packing of sedimentation tank is mainly used for various sedimentation and sand removal functions. It is the most widely used in water supply and drainage projects in the past ten years and has become a water treatment device. It has the advantages of wide application range, high processing effect and small floor space. It is suitable for water inlet sand removal, general industrial and domestic water supply sedimentation, sewage sedimentation, oil separation and tailwind concentration treatment. It is suitable for both new construction projects and the renovation of existing old pools, and can achieve good economic benefits.
rb(, , );">Incline tube packing Straight tubes are mainly used in high-load biological filters, tower biological filters, and submerged biological filters ( Also known as contact oxidation tank) and microbial carrier of biological turntable, biochemical treatment of industrial organic wastewater and urban sewage.
rb(, , );">Incline tube filler Installation procedure:
. Installation of mud discharge pipe at the bottom of the sedimentation tank: The installation sequence of the inclined tube sedimentation tank generally starts from the bottom. First, complete the installation of the mud discharge pipe system at the bottom to ensure that the opening of the mud discharge pipe meets the design requirements and is firmly fixed. Check Only after everything is correct can you proceed to the next installation process.
Complete the installation of the filler bracket: According to the installation construction drawing of the filler bracket of the inclined tube sedimentation tank, first install the filler bracket in place, check that all welding nodes are firm, the bracket is strong enough to bear the weight of the filler, and the bracket is installed on the surface of the bracket. Complete the anti-corrosion treatment;
Complete the ironing of the inclined tube filler: According to the ironing method of the inclined tube filler, package each inclined tube filler as a separate ironing unit. After the ironing is completed in one unit, , stack them neatly on the site after the ironing is completed (keep a small amount of loose pieces for later use).
Assembling in the inclined tube packing tank: Assemble the hot-sealed packing unit on the upper part of the packing bracket from left to right. Always keep the &;
, rb(, , );">Incline tube filler Upper part fixed: Since the specific gravity of the inclined tube filler is slightly less than water, the inclined tube filler needs to be above the filler after it is assembled in the pool. The round steels pulled up from left to right are reinforced (two round steels are required to pass through the upper part of each unit filler). The two ends of the round steel are reliably fixed on the wall of the sedimentation tank. After the round steel is installed, it can well prevent tilting. The pipe filler may loosen and float during initial use. The round steel adopts epoxy coal pitch for anti-corrosion.
, Operation and debugging of the inclined tube sedimentation tank
, Check whether the water inflow is uniform, and must not It will cause impact to the sedimentation tank and affect the sedimentation effect;
, adjust the height and level of the outlet weir to the appropriate level to maintain uniform water output;
, after the above construction process, the installation of the filler of the inclined tube sedimentation tank has been completed. .After being put into normal use, it is necessary to determine the sludge discharge cycle according to the concentration of suspended solids in the incoming water, and pay attention to timely sludge discharge to ensure that the inclined tube sedimentation tank always maintains good operating conditions and satisfactory effluent water quality.
Qiancheng brand rb(, , );"> Inclined tube packing Notes:
Since the specific gravity of the inclined tube packing is slightly less than water, the applied rebar or round steel tie bar should be fixed above the packing. , to prevent them from loosening and floating, the steel bars and angle steel are all made of epoxy coal pitch for anti-corrosion.
The illustrated plate must be installed, otherwise it will easily cause the inclined pipe filler to tilt or even collapse!
rb(, , );">
WhatsApp
