944 adhesive primer, adhesion promoter, 3M94 substitute

The primer/adhesive promoter developed by our company is a light brown transparent liquid, which has successfully replaced the primers/adhesion promoters such as, The following features
The initial adhesion is super strong, and it can reach the destructive level in extreme time
The time interval between applying the primer and applying the tape can be very long, which is convenient for employees to operate and there is no need to repeat the brushing
Applicable to all types of domestic products, Imported tape
has a lighter smell and is more cost-effective,
can be bonded to materials such as,,,/,,,,,glass, etc.
Physical properties Appearance: light brown transparent liquid
Density grams/cubic centimeter
Packaging/tube,/bottle, bottle,/barrel
Chemical properties The adhesion promoter is a light brown transparent liquid Liquid, an adhesive that is coated on the surface of the adherend before gluing in order to improve the bonding performance. It interacts with water molecules in the air to produce high adhesion and has high temperature resistance. Especially when used together with acrylic foam tape, it can achieve excellent bonding effects. Features: Speed up the initial bonding speed of the tape and improve the adhesive strength.
Main uses: Mainly used in various car door soundproof seals, various windows and doors, elevators, air conditioners, furniture soundproof seals, welcome pedals, rain or shine gears, car handles, car door bowls, car decorations Strips, anti-collision strips, rearview mirror covers, car rearview mirror brows to block rain, car brows for rearview mirrors in rain or shine, car film edge sealing, rear tank fuel tank cover, car lights (such as back buffer strip bonding, car lights Frame tape bonding) and tackifiers for laminating aluminum foil tape, copper foil tape, tape film, etc. to electroplated metal, epoxy board, and other materials
How to use, preparation of bonding surface Clean the bonding surface with a lint-free cloth dampened with isopropyl alcohol, acetone or toluene.
. Shake the bottle containing the adhesion promoter vigorously before use. Use special tools or brushes or rollers (no fibers must fall off) to evenly apply the adhesion promoter on the bonding surface. The general coating thickness is ~.
Drying time Drying time generally depends on temperature, humidity, and coating thickness. .Normal drying time: minutes~minutes. Optimum drying time: minutes~minutes (temperature ℃, humidity). During this period, it must be noted that the coating surface is absolutely free from contamination
. Double-sided tape bonding. Stick the double-sided tape to the dried coating. layer surface and apply a certain amount of pressure.
Contact number: Ms. Feng
Email@
Company website