Year1
< r > Working principle:
< br )Water bath desulfurization dust collector Use high-pressure spray to greatly increase the water vapor area. The gas-liquid-solid three-phase reaction time is lengthened, and the dust removal effect of the dust removal equipment is very good. The flue gas from the boiler enters through the inlet of the boiler dust collector. A nozzle is installed at the inlet. The water mist sprayed from the nozzle will moisten the ash material in the flue gas. In the process, the ash material is moistened by the water mist and makes it wet. The increased weight facilitates separation. After that, it passes through the flue composed of granite slabs and impacts the water surface at a very high speed. Most of the dust particles remain in the water due to increased weight or adhesion to the water. This stage is the impact stage. After this stage, the water surface Due to the movement of the gas, a parabolic water droplet, water mist and foam area is formed, and the dust-containing gas is further purified by water droplets and water mist in this area. This is the shower stage. And because when entering the equipment, the temperature of the flue gas is generally not lower than 10 degrees Celsius (some are higher). Water mist is formed in the cylinder under the impact of the flue gas. When the dust particles change direction and move upward, they are further blown by the water mist. Purification, this stage is atomization dust removal. After being purified through the above three methods, the clean gas enters the chimney from the outlet of the impact water bath dust collector.
< br ) Considering the effect of the desulfurization dust collector and dehydration, we have set three different speeds for the impact water bath desulfurization dust collector.
< br ) When the flue gas enters the impact pipe of the equipment, the speed is the fastest. According to different dust removal air volumes, this speed is generally ~/, the speed in the shower stage is very slow, and in the atomization stage The speed is slightly accelerated, and the speed is faster at the exit. According to these different speed changes, the effect of dust removal and dehydration can be achieved.
< br ) Features:
< br ) Water bath desulfurization dust collector: low price and easy to install. Water can be recycled. Adding alkaline water to the pool can achieve a desulfurization effect
< br ) The internal structure of the water bath dust collector is made of granite, and the joints are seamed with furan resin clay to ensure durability. It is resistant to erosion, corrosion and high temperature, and has a long service life
< br ) The water bath desulfurization dust collector is installed after the induced draft fan, which can extend the life of the fan
< br ) High dust removal efficiency , does not produce secondary pollution
< br ) The water bath desulfurization dust collector has a wide range of adaptability and strong adaptability.
WhatsApp
