Floor-type sand making system sand making production line sand making equipment

Advantages of Champion Short Process Sand Making System Champion short process sand making system integrates crushing, shaping, stone powder control, gradation adjustment, and water content control of machine-made sand, completely changing the traditional machine-made sand production line that destroys rivers and the ecological environment, and causes dust pollution all over the sky. status. Frame structure, small footprint, short construction period, small civil construction investment, fully enclosed structure, no dust, low noise, dust emission is far less than the national standard index of /.
The core sand making machine of the system adopts the original German sand making machine, which can process the stone into high-quality machine-made sand in one step, greatly simplifying the process, greatly reducing equipment investment, and significantly reducing production costs. It has an advanced particle gradation adjustment device. The fineness modulus of the system can be freely and easily adjusted between.
Compared with conventional sand making machines, the unique patented dual-chamber rotor design of the original German sand making machine improves the sand making efficiency by more than 100%, reduces rotor wear by more than 100%, and increases the feed size by more than 100%, eliminating the need for a two-stage cone crusher. , energy consumption is reduced by more than 10%.
>The champion short-process sand making system is highly cost-effective. The advanced sand making module of Zhengzhou Dingsheng Engineering Technology Co., Ltd. is based on a German sand making machine and an air separation screen. It consists of a hoist, a blower, a control panel, a recovery filtration system, and a dust collector. It is composed of a closed-loop control system with automatic control of fineness modulus as the core technology. The specific performance is as follows: The sand making equipment uses a German sand making machine as the main machine, which has low consumption, low cost, good particle shape, and stable gradation. Features such as the unique double-cavity rotor structure design and single-motor drive improve crushing performance while reducing energy consumption.
, using air separation and screening technology, qualified products and over-standard products in the crushed materials can be separated at the same time. The classification accuracy is accurate. The dust will be sucked away by the dust collector. The products can be adjusted through regulation and gradation, and the over-standard products will be Return to the crushing program.
The equipment is a fully enclosed structure, and dust does not escape, so there is no noise, no emissions, and dust prevention measures are foolproof.
By using a German sand making machine, an air separation screen, and a return closed-circuit system, machine-made sand can be produced cleanly and effectively, and the particle shape can be comparable to natural sand. Zhengzhou Dingsheng Engineering Technology Co., Ltd. uses process sand making module equipment to make sand. Its fineness modulus can be adjusted freely, and the appropriate moisture content can be set by adding water and mixing, without causing a bias in product gradation.
Champion short-process sand making system can control the proportion of sand very well, so that the proportion of sand with particle sizes in the middle range is increased, which can greatly meet the needs of various concrete and dry-mixed mortars. Demand for sand.
Statistical data shows that when the single screening curve exceeds the area and moves to the upper left, it means that the sand is too fine, and a large amount of cement slurry is needed when mixing concrete, which can easily reduce the strength of the concrete and increase the shrinkage. When the excess area moves to the lower right, it means that the sand is too coarse, and the workability of the prepared concrete is difficult to control, and the internal friction is large, making it difficult to shake down and form. It is generally believed that sand in zone gradation has moderate thickness and good gradation, and is the most ideal grading zone for preparing concrete.