Supply high quality pipe cards

规格：

125

颜色：

橙黄色

_Product details
_ 1. Overview
Pipe clamps are composed of clamping plates, oval backing plates, round head bolts and nuts.
The thickness of the applicable support ring or downdraft plate and support plate are five levels respectively. If there are special materials, please mention them when ordering and mark them in the drawings.
2. Technical Requirements
When the round head bolts are spot welded to the clamping plate, the direction of the small groove at the end should be consistent with the length direction of the clamping plate, so that the orientation of the pipe clamp can be identified during use.
The plates suitable for making pipe clamps should meet the requirements of / The profiles should meet the requirements of /
The threads of round head bolts should be made with coarse threads and ordinary threads according to the requirements of /. The nut adopts hexagonal nut.
3. Mark packaging
The mark of the pipe clamp consists of three parts
Indicates the pipe clamp
,,,, respectively indicate that the applicable thickness of the clamp is,,,,
Indicates that the material of clamping plate, backing plate and nut is bolt material is
Indicates that the material of clamping plate, backing plate and nut is
Indicates that the material of clamping plate, backing plate and nut is
Marking example
It is suitable for pipe clamps with a thickness of 0.5 and mainly made of materials. The mark is
pipe clamp
. If the user needs, it can be suggested that the mark should be printed on the surface of the finished product.
The acceptance and packaging of pipe cards shall comply with the regulations of /