Garrett metal detector

Garrett Metal Detector
Repair and Maintenance
If the instrument does not work properly, the battery may be low on power. Please replace the battery and give it a try
Follow the instructions in the battery box The positive and negative poles of the battery are placed. If the machine is shut down for a long time, the battery should be removed to prevent the battery from corroding in the box. The probe cannot be placed next to a stove or in other high-temperature environments.
Also note that
⑴
The main body of the instrument and the probe coil are not strong against shocks, so collisions with hard objects should be avoided
⑵
Lubricating oil cannot be used anywhere on the instrument< br/> ⑶
Use with caution and do not let sharp metal objects scratch or damage the probe coil.
Controller
Power Switch
Press the power button to turn the detector on or off. Note that the device restart interval should be
to
minutes.
Sensitivity button
After pressing the sensitivity button
four sensitivity levels will appear on the display in sequence. High sensitivity is usually used to detect small or deeply buried targets. When there are too many metal garbage interferences in the surrounding environment of the detected object, or it is buried in soil with high mineral content or on the shore of salty water, or there are For other metal detectors, equipment generally chooses low sensitivity.
Mode button
Press
Mode button
Select the following three detection modes
Jinghong Dakaisheng Trading Co., Ltd.
Contact person Liu Xue
Phone number
Fixed number
Zhen
Company address Shop No. Yunjingli, Tongzhou District, Beijing