Lightweight partition board equipment price

规格：

可定制

型号：

各种

Easy to operate, reliable in action, mature and stable equipment technology, fully hydraulic power, hydraulic opening and closing of the mold body and end mold, sufficient power, strong durability
, automatic length adjustment, excellent plate forming effect
, The process has good stability, which greatly eliminates the randomness in the operation process of workers
, group mold production, vibration blanking molding, and unit flow process, the wall panels have good flatness and high dimensional accuracy
, Using unique mixing technology and forming technology, it can reduce the water-cement ratio of lightweight aggregate concrete, improve the strength performance of wall panels, and reduce the shrinkage value of wall panels
, high structural rigidity, high molding precision, accurate thickness, and smoothness Good strength
Continuously stretched netting type, the netting is accurate and convenient, the tension is high, the fiberglass mesh cloth is positioned accurately, and the thickness of the protective layer is uniform.
, Motorized mold opening and closing, simple operation, high efficiency
, Plastic tube core tube, no flushing, mechanical automatic pipe extraction (optional), high efficiency
, automatic temperature control, Self-heating or steam heating, special curing device (optional) self-curing, short curing and demoulding cycle, increased production capacity, no need to build another curing kiln, low cost, advanced technology, injection first, then Pipe threading can reduce the water-cement ratio, improve strength without adding additional additives, reduce costs, reduce movement, avoid segregation and heterogeneity, and have a high yield.
The thickness and length are all adjustable, and one machine can be used for multiple purposes. (,,,,,, can be customized for production)
, wide range of application
Advantages of lightweight partition board equipment
According to the pumping volume, I divide it into three categories: large, medium and small. Type,
Adopt foaming stirring pumping system. The pumping volume per hour is cubic, cubic, or cubic. No matter which one is chosen, only three workers are needed during formal production. Two of them complete the foaming and mixing task, and one worker holds the pump tube and supplies it to the mold. Just pour it in. This production method can save a lot of workers and improve production efficiency. The demoulding method adopts one-time overall demoulding. Each group of the mold-setting partition board equipment system can produce wall panels at one time. All demoulding can be completed in less than an hour, and the efficiency is as high as you can imagine
Characteristics of lightweight partition board equipment
) The unique double-groove process is a good solution Crack problems caused by the installation.
) The product has high precision and good flatness.
) The lightweight partition board production equipment adopts mechanical pipe drawing and has a high degree of automation.
) The plastic core tube does not need to be rinsed.
) One machine has multiple uses. Any set of equipment can produce partition boards, reinforced gypsum wall board machines, front concrete partition boards, aerated steel wire mesh, fly ash foam cement wall panels, silicon magnesium aerated Cement partition panels.
) The equipment moves independently, opens and closes the mold hydraulically, and uses batteries for voltage. It is not suitable for industrial electricity to ensure production safety.
) The equipment can be equipped with optional electric heating and steam curing room heating, with high mold ejection efficiency