Shengyada second-guaranteed welding welding smoke purification device workshop industry

Structural features of welding smoke purifier ◆The whole machine consists of a centrifugal fan, a filter cartridge filter chamber, a pre-filter, a dust collection drawer, a purifier chamber, a pulse cleaning system, an electronic control device and a flexible suction arm with a dust collection cover. ◆The purifier uses a filter cartridge as the filter, with a large filtration area and low filtration flow rate per unit area, so it has high filtration efficiency. ◆The purifier adopts optimized design and adopts air inlet equalization and diversion technology to solve the problem of uneven air flow in each chamber that is difficult to avoid in general bag dust collectors. ◆The filter element is placed vertically, which solves the problem that dust on the upper part of the filter element is difficult to remove when placed horizontally. ◆The air flow organization design of the purifier is reasonable, the resistance loss is small, the machine is compact in appearance, flexible in movement, simple to operate and easy to maintain. ◆The filter cartridge is made of certified high-efficiency filtration material covered with Teflon membrane, with a filtration efficiency of up to 100%. The service life of the filter cartridge is much longer than that of ordinary filter materials under normal use conditions. ◆Because one stage of primary filtration is used before the fine filter, the life of the fine filter is greatly extended. ◆The suction arm of the purifier can be rotated, moved up, down, left, and right, and is self-locking at any position in the space. ◆Because the purifier has four wheels at the bottom of the chamber, it is easy to move and is suitable for areas where the working point changes frequently and dust must be purified.