Year1
- 规格：
- 2kg/盒
Colored tile grouting agent
Scope of application: Suitable for indoor and outdoor filling of tile joints with a width of .
Base treatment
The grouting agent should be used after the tile adhesive has dried. The joints of the tiles should be clean and free of loose material.
Precautions
*Please use up the mixed caulking agent within hours
*It should be used at a temperature of +~+℃
*Please proceed after the caulking agent is completed Hourly Moisture Curing
*The water absorption of different ceramic tile sides, the amount of water added when mixing, and the ambient temperature/humidity during use may slightly affect the color of the cured grout
*This product Contains cement, which will produce an alkaline reaction when exposed to water. Please pay attention to proper protection of your eyes and skin. If your skin is stained with slurry, you can rinse it with clean water. If your eyes are stained with slurry, please seek medical treatment in time and keep it out of reach of children
Construction Process
Pour the entire package of colored caulking agent into an appropriate amount of clean cold water according to the following proportions, and stir until uniform and without lumps. Water is required for each kilogram of light gray caulking agent, and water is required for every kilogram of other color caulking agents.
Use a rubber-bottomed ash spoon to squeeze the mixed grouting agent into the reserved joints along the diagonal direction of the ceramic tiles.
After the grouting agent is initially cured, use a slightly damp sponge to clean off the excess grouting agent on the surface of the tiles.
After that, use a dry cloth for further cleaning. Cured colored caulking agent is waterproof.
Important Statement
Any printed color samples provided by our company are only for customers' reference when choosing, but are not used as a basis for acceptance. The actual products may vary slightly from batch to batch. Customers are asked to use actual samples as a guide when selecting products. Quarantine products may contaminate the surface of ceramic tiles, especially ceramic tiles with rough, loose, porous and highly absorbent surfaces and various natural stones, marbles, etc. The working hours should be strictly in accordance with the operating requirements specified in the instructions, and they should be cleaned in time. If necessary, local tests should be done first. The company is not responsible for the jointing agent contaminating the brick surface due to improper operation. The process of filling, compaction and polishing must be strictly followed in the instructions for use. The company is not responsible for the loosening or falling off of the jointing agent due to improper operation. , responsibility for losing followers, etc.
Storage Please store in a cool and dry place. The unopened shelf life is one month.
All products of our company are tested by the national testing laboratory. All products of our company have been tested and qualified, so there is no need to worry! At the same time, our company has professional and technical personnel to solve all engineering problems, problems, etc. for our users free of charge
Manufacturer contact person Lu Yanping welcomes your calls
WhatsApp
